« previous next »
Pages: [1]   Go Down

Author Topic: Carburetor Application Guide  (Read 1469 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4574
  • Karma: 215
  • OHIO REDNECK
Carburetor Application Guide
« on: February 23, 2012, 06:47:29 pm »
Logged

Share on Facebook Share on Twitter

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4574
  • Karma: 215
  • OHIO REDNECK
Re: Carburetor Application Guide
« Reply #1 on: February 23, 2012, 06:49:36 pm »
Logged

Offline Gypo Logger

  • 3 cube
  • *
  • Posts: 22
  • Karma: 7
Re: Carburetor Application Guide
« Reply #2 on: March 13, 2016, 12:58:06 pm »
Tillotson makes choosing a kit alot easier than Walbro. It seems that the RK- 23HS kit is almost universal with most Husky pro saws.
Logged
Like Like x 1 View List

Offline ChipsFlyin

  • 4 cube
  • **
  • Posts: 26
  • Karma: 12
  • Location: Pittsburgh, PA
Re: Carburetor Application Guide
« Reply #3 on: January 19, 2018, 12:19:23 pm »
Is there a chance that anyone saved the Walbro PDF  before Walbro changed their site?  I though that I did but did not probably thinking "Why save when I could just bookmark"    That was such a great document to reference.
Logged
Mark

Poulan 2000, 2300 CVA, S25CVA, Craftsman 2.3 PS/VL (S25CVA), Craftsman 3.0/ Poulan 3000, Craftsman 3.3/ Poulan 3300 (2), Poulan 3450,  Poulan 3400, Wright 141A/401A,  Olympyk 284, Homelite Super XL 925,
Husqvarna 288XP

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carburetor Application Guide
« Reply #4 on: January 19, 2018, 12:58:57 pm »
Yep I got it in another thread. Give me a sec.
Logged
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carburetor Application Guide
« Reply #5 on: January 19, 2018, 01:01:24 pm »
Logged
Like Like x 1 View List

Online ray benson

  • 6 cube
  • ****
  • Posts: 181
  • Karma: 94
  • Retired Industrial Electrician
  • Location: Indiana
Re: Carburetor Application Guide
« Reply #6 on: January 19, 2018, 01:26:29 pm »
Quote from: ChipsFlyin on January 19, 2018, 12:19:23 pm
Is there a chance that anyone saved the Walbro PDF  before Walbro changed their site?  I though that I did but did not probably thinking "Why save when I could just bookmark"    That was such a great document to reference.
There were many files. Bookmarking sites isn't the best idea as they are changed and become invalid sooner or later. Here is a Walbro  application guide
http://www.mediafire.com/file/y3udkm8qve7quzw/Application_Guide_2015.xlsx
Logged
Like Like x 1 View List

Offline ChipsFlyin

  • 4 cube
  • **
  • Posts: 26
  • Karma: 12
  • Location: Pittsburgh, PA
Re: Carburetor Application Guide
« Reply #7 on: January 19, 2018, 03:12:35 pm »
Thanks! I have been looking for the old wem.walbro PDF that had all of the saw brands, saw model, carb used and venturi size all in one place for quite sometime hoping someone downloaded.  I found one list that has some venturi and carb parameters but not specific.

http://www.lghost.ru/lib/mirror/necrojohnson.fannet.ru/boating/books/diaphragmcarb.pdf

I also found this one in a couple places which does have venturi sizes but not the exact chainsaw model. It's about 3/4 of the way down this page with the heading

 "Here's the mother of all venturi size listings in pdf. There's bookmarks that have it sorted by model, venturi size and application."

https://www.arboristsite.com/community/threads/walbro-carb-specs.302569/
Logged
Mark

Poulan 2000, 2300 CVA, S25CVA, Craftsman 2.3 PS/VL (S25CVA), Craftsman 3.0/ Poulan 3000, Craftsman 3.3/ Poulan 3300 (2), Poulan 3450,  Poulan 3400, Wright 141A/401A,  Olympyk 284, Homelite Super XL 925,
Husqvarna 288XP
Like Like x 1 View List

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Carburetor Application Guide
« Reply #8 on: January 19, 2018, 10:24:56 pm »
I use this site for Walbro lookups: http://www.outdoorpartspower.com/pages/OemParts?aribrand=ECH  Use drop down menu on left Walbro is last one.
Shep
Logged
Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Carburetor Application Guide
« Reply #9 on: January 22, 2018, 05:59:12 pm »
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
43 Replies
35255 Views 		Last post September 08, 2014, 10:28:19 pm
by TedB.
10 Replies
824 Views 		Last post December 23, 2016, 06:26:52 am
by joe_indi
3 Replies
256 Views 		Last post June 26, 2013, 08:07:15 pm
by Cut4fun .
1 Replies
204 Views 		Last post December 13, 2016, 09:52:38 pm
by Eccentric
9 Replies
388 Views 		Last post September 02, 2013, 08:07:01 am
by 660magnum
3 Replies
182 Views 		Last post October 12, 2014, 01:05:51 am
by Philbert
1 Replies
348 Views 		Last post December 21, 2014, 03:31:24 pm
by 660magnum
8 Replies
1309 Views 		Last post January 19, 2015, 06:01:10 pm
by 660magnum
1 Replies
470 Views 		Last post November 21, 2018, 02:49:12 pm
by Cut4fun .
1 Replies
361 Views 		Last post December 08, 2020, 10:50:19 am
by 3000 FPS