Author Topic: 325 Rd 3 Chain build off  (Read 2733 times)

0 Members and 0 Guests are viewing this topic.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: 325 Rd 3 Chain build off
« Reply #570 on: April 27, 2016, 09:20:35 pm »
Thanks for doing it Kevin. Wish I had more time to work on a chain for this one. I guess not too bad to file a loop in a motel and not run it.
Like Like x 1 View List

Offline Sierrawoodsman

  • 4 cube
  • **
  • Posts: 68
  • Karma: 14
Re: 325 Rd 3 Chain build off
« Reply #571 on: April 27, 2016, 09:23:14 pm »
Yes thank you Kevin.


Sent from my iPhone using Tapatalk
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: 325 Rd 3 Chain build off
« Reply #572 on: April 27, 2016, 09:30:17 pm »
I am still doing some timing and will post when I am done.   So far it pretty much matches what Mike has.
PP 505, 475, 445.
Like Like x 1 View List

Offline dbittle

  • 3 cube
  • *
  • Posts: 7
  • Karma: 4
Re: 325 Rd 3 Chain build off
« Reply #573 on: April 27, 2016, 09:35:00 pm »
That was fun to be a part of.  My buddies at work checked in a couple of times to see if the results were in.  I was feeling pretty good until I looked a little closer at the stock chain results.  Stock RS put everybody but Cut4fun on the trailer in work chain.  So mine was only a little slower than stock.....
Like Like x 1 Winner Winner x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: 325 Rd 3 Chain build off
« Reply #574 on: April 27, 2016, 10:28:01 pm »
Ok Guys here are the times I got.  Timing by 3000 FPS

Stock chains.
K1L        3.58
LG33      3.23
RS          2.38
LPX         2.36

Race chains.
Concretegrazer       2.22
3000 FPS                2.00
Sierra Woodsman    2.68

Work Chains.
Cut4fun Round LPX                    2.38
Cut4fun Square RS                    2.48
Cut4fun Square LG 33                2.65
Cut4fun Round LG 33                 2.74
Mdavlee Square LPX                   2.28
DBittle  Square LPX                    2.24
Sierra Woodsman  Square LPX    2.42
Sierra Woodsman  Square RS      2.44


Timing by Mdavlee


Stock
k1L 3.52
LG33 3.13
RS 2.29
LPX 2.38

Race
Concretegrazer 2.28
3000fps 2.06
Sierra woodsman 2.78

Work
Cut4fun LPX 2.25
Cut4fun RS 2.60
Cut4fun LG33 2.56
Cut4fun round Lg33 2.62
mdavlee 2.35
Dbittle 2.34
Sierra Woodsman LPX 2.50
Sierra Woodsman RS 2.48


PP 505, 475, 445.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: 325 Rd 3 Chain build off
« Reply #575 on: April 27, 2016, 10:37:35 pm »
Looks like HL Supply  T-shirt will be going to Roger for overall.

WTG Roger

Thanks to all that entered. 

Roger unless you or other timers show us different for work and race. I will be making you a little badge for Race winner here too.

Once again thanks for all the Work Kevin.   It was fun and interesting for me.    I got to try some things on this chain that I did not do last time.
Thanks to all you guys that entered it was great to see how it all turned out.   
If you want to post a picture of my chain go right ahead.
PP 505, 475, 445.
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: 325 Rd 3 Chain build off
« Reply #576 on: April 27, 2016, 10:38:39 pm »
That was fun to be a part of.  My buddies at work checked in a couple of times to see if the results were in.  I was feeling pretty good until I looked a little closer at the stock chain results.  Stock RS put everybody but Cut4fun on the trailer in work chain.  So mine was only a little slower than stock.....

Dbittle I think you did pretty good according to the timing I got.   Way to go.   The second cut that Kevin made with your chain was really quick. 
PP 505, 475, 445.
Agree Agree x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: 325 Rd 3 Chain build off
« Reply #577 on: April 27, 2016, 10:42:08 pm »
Thanks for doing it Kevin. Wish I had more time to work on a chain for this one. I guess not too bad to file a loop in a motel and not run it.

I would say not bad at all.   I cannot hand file worth a crap that is why I always enter the race chain and just square ground it this time.
PP 505, 475, 445.
Like Like x 1 View List

Offline Sierrawoodsman

  • 4 cube
  • **
  • Posts: 68
  • Karma: 14
Re: 325 Rd 3 Chain build off
« Reply #578 on: April 27, 2016, 10:56:43 pm »
Looks like HL Supply  T-shirt will be going to Roger for overall.

WTG Roger

Thanks to all that entered. 

Roger unless you or other timers show us different for work and race. I will be making you a little badge for Race winner here too.

Once again thanks for all the Work Kevin.   It was fun and interesting for me.    I got to try some things on this chain that I did not do last time.
Thanks to all you guys that entered it was great to see how it all turned out.   
If you want to post a picture of my chain go right ahead.



Yes please post a good picture or two
since we got Rogers permission. I'd like to know where I went wrong. I'm going to Consider this a learning experience and try to do better the next go around
Like Like x 1 View List

Offline Sierrawoodsman

  • 4 cube
  • **
  • Posts: 68
  • Karma: 14
Re: 325 Rd 3 Chain build off
« Reply #579 on: April 27, 2016, 11:03:23 pm »
Also, if anyone wants to see a picture of the losing chain that won the black ribbon I've got some dandies! Lol


Sent from my iPhone using Tapatalk
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
32 Replies
2227 Views
Last post February 27, 2012, 10:21:43 pm
by mweba
15 Replies
1031 Views
Last post July 03, 2012, 11:32:20 am
by Cut4fun .
0 Replies
219 Views
Last post April 05, 2013, 01:09:48 pm
by Cut4fun .
7 Replies
870 Views
Last post August 20, 2014, 06:05:07 am
by weimedog
7 Replies
160 Views
Last post April 03, 2015, 12:35:32 pm
by AmericanPsycho
1573 Replies
10649 Views
Last post January 12, 2016, 01:41:18 pm
by Cut4fun
0 Replies
119 Views
Last post October 01, 2015, 01:39:49 pm
by Cut4fun .
13 Replies
380 Views
Last post December 17, 2015, 03:35:35 pm
by rjames
48 Replies
823 Views
Last post October 14, 2016, 11:24:49 pm
by mdavlee .
33 Replies
312 Views
Last post April 28, 2020, 06:29:09 pm
by 3000 FPS