Author Topic: 325 Rd 3 Chain build off  (Read 2475 times)

0 Members and 0 Guests are viewing this topic.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2666
  • Karma: 151
Re: 325 Rd 3 Chain build off
« Reply #60 on: January 14, 2016, 05:20:55 pm »
Here's what I did ,used two padded envelops .One addressed to Kevin the other addressed back to myself .They weighed one with the chain and applied the amount of stamps then both together to go to Kevin .That way all he had to do is dump it  in the envelope  and  put it in the mailbox .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 325 Rd 3 Chain build off
« Reply #61 on: January 14, 2016, 07:38:39 pm »
Here's what I did ,used two padded envelops .One addressed to Kevin the other addressed back to myself .They weighed one with the chain and applied the amount of stamps then both together to go to Kevin .That way all he had to do is dump it  in the envelope  and  put it in the mailbox .

I dropped yours off with the others. It got a tracking # sticker by doing it that way. 
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 325 Rd 3 Chain build off
« Reply #62 on: January 14, 2016, 08:21:54 pm »
What I have come up with.  ::) :P

I think I will try and find a stihl mount bar in 325 050 67dl and then cut on it alittle at the rear to fit 66dl and bigger gear if go with 9T or not. Guessing right now to stick with 8T.
Use adapters to fit my big poulans with D009 mount.

Crap part is I had some 325 050 16" and gave them away basically.

Anyone have a used but not getting used bar for this project?
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2001
  • Karma: 147
  • Location: MD
Re: 325 Rd 3 Chain build off
« Reply #63 on: January 14, 2016, 08:28:28 pm »
I think I have what you are looking for. The total superbars Stihl mount .325 .050 67DL bar has a 3/8,.050 60DL body with a .325 pitch. Cut I have both Stihl and husky small mount 16" bars any thing you would like for me to try? I can send you the bar if you need it.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 325 Rd 3 Chain build off
« Reply #64 on: January 14, 2016, 08:34:17 pm »
I think I have what you are looking for. The total superbars Stihl mount .325 .050 67DL bar has a 3/8,.050 60DL body with a .325 pitch. Cut I have both Stihl and husky small mount 16" bars any thing you would like for me to try? I can send you the bar if you need it.

Total stihl mount bar is T200PV2  67dl 050 325.  I am trying to stay in large mount husky size over the small mount husky.

Just trying to find a cheap bar to cut on. Not something nice like total.
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2001
  • Karma: 147
  • Location: MD
Re: 325 Rd 3 Chain build off
« Reply #65 on: January 14, 2016, 08:35:20 pm »


Has 9mm husky bar adapter in the slot.
FEAR NO TREE. FEAR GOD.
Like Like x 1 View List

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2001
  • Karma: 147
  • Location: MD
Re: 325 Rd 3 Chain build off
« Reply #66 on: January 14, 2016, 08:38:13 pm »
I was using the total bar as a reference from some of the other post. That it would work to take a 3/8 .050 60dl bar and put a .325 tip on it. Let me know if that Stihl bar will suit what you are looking for.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 325 Rd 3 Chain build off
« Reply #67 on: January 14, 2016, 09:09:32 pm »


Has 9mm husky bar adapter in the slot.

Do you mind me grinding on the tail mount?

Thats what I was thinking too. But use bolt square nuts grinded down or spring rings.  You know rednecked. ;)

Plus I dont know how the poulan bar studs are spaced compared the the husky.  never paid attention to that detail.
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2001
  • Karma: 147
  • Location: MD
Re: 325 Rd 3 Chain build off
« Reply #68 on: January 14, 2016, 09:34:58 pm »
You can grind on it. Would you like me to send the adapter along?
FEAR NO TREE. FEAR GOD.

Offline Moparmyway

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 44
Re: 325 Rd 3 Chain build off
« Reply #69 on: January 15, 2016, 08:29:49 am »
Anyone have a used but not getting used bar for this project?
Crap, I cant help there, I dont even have any .325 chain

Anyone have 2 loops I can buy from them ?

 

Related Topics

  Subject / Started by Replies Last post
32 Replies
1791 Views
Last post February 27, 2012, 10:21:43 pm
by mweba
15 Replies
962 Views
Last post July 03, 2012, 11:32:20 am
by Cut4fun .
4 Replies
173 Views
Last post February 24, 2013, 03:24:31 pm
by RoyM
0 Replies
199 Views
Last post April 05, 2013, 01:09:48 pm
by Cut4fun .
7 Replies
778 Views
Last post August 20, 2014, 06:05:07 am
by weimedog
7 Replies
135 Views
Last post April 03, 2015, 12:35:32 pm
by AmericanPsycho
1573 Replies
10189 Views
Last post January 12, 2016, 01:41:18 pm
by Cut4fun
0 Replies
93 Views
Last post October 01, 2015, 01:39:49 pm
by Cut4fun .
13 Replies
333 Views
Last post December 17, 2015, 03:35:35 pm
by rjames
48 Replies
719 Views
Last post October 14, 2016, 11:24:49 pm
by mdavlee .