Author Topic: ? 66DL 325 050 bar ideas  (Read 197 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
? 66DL 325 050 bar ideas
« on: January 14, 2016, 03:37:02 pm »
I stepped in it trying to come up with a D009 66DL 050 325 bar for testing chains.  No such critter I can locate so far. 
So I started looking a D176 mount that I could mod over to D009 for my testing uses.

I have small mount bars in 66DL but looking for the large mount.

Any ideas? Maybe sprocket nose swap?  Would a 60DL 3/8 switched to 325 nose be 66DL. 

Help me out on my rednecking  :P
REDNECK Saw Repair

Share on Facebook Share on Twitter


Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: ? 66DL 325 050 bar ideas
« Reply #1 on: January 14, 2016, 03:45:23 pm »
I don't know for sure. I have a carlton 16" .050" in large mount.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: ? 66DL 325 050 bar ideas
« Reply #2 on: January 14, 2016, 04:13:49 pm »
I need to go through my bars this weekend. That ought to be fun. Least all hanging up or on saws.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: ? 66DL 325 050 bar ideas
« Reply #3 on: January 14, 2016, 08:22:52 pm »
I don't know for sure. I have a carlton 16" .050" in large mount.

What I have come up with.  ::) :P

I think I will try and find a stihl mount bar in 325 050 67dl and then cut on it alittle at the rear to fit 66dl and bigger gear if go with 9T or not. Guessing right now to stick with 8T.
Use adapters to fit my big poulans with D009 mount.

Crap part is I had some 325 050 16" and gave them away basically.

Anyone have a used but not getting used bar for this project?
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: ? 66DL 325 050 bar ideas
« Reply #4 on: January 14, 2016, 11:33:18 pm »
I need to go through my bars this weekend. That ought to be fun. Least all hanging up or on saws.

I was going to look at what I have this week end also.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: ? 66DL 325 050 bar ideas
« Reply #5 on: January 15, 2016, 12:37:55 pm »
I recall now the stihl was a pita on off with even the right dl count.  Thinking tail mount was longer or something. Will need to test and see with my 16" 3/8 bar what was up.

REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: ? 66DL 325 050 bar ideas
« Reply #6 on: March 01, 2016, 03:40:58 pm »
....   Would a 60DL 3/8 switched to 325 nose be 66DL. 

Help me out on my rednecking  :P

At least with Tsumura it will be 68dl, with an 11t nose 3/8" converted to 12t .325.

The source of that info is assumed to be reliable, and has posted it several times.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: ? 66DL 325 050 bar ideas
« Reply #7 on: March 01, 2016, 08:08:18 pm »
Were good for bar now Niko so it dont matter.  Went small mount instead.
REDNECK Saw Repair

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: ? 66DL 325 050 bar ideas
« Reply #8 on: March 01, 2016, 10:39:57 pm »
 I looked at what I had Kevin but did not have what you need.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
374 Views
Last post December 04, 2011, 03:27:02 pm
by Old Iron Logging
4 Replies
625 Views
Last post January 05, 2012, 08:44:51 am
by Al Smith
6 Replies
567 Views
Last post December 25, 2013, 06:56:25 pm
by Magnus
12 Replies
165 Views
Last post January 05, 2014, 10:21:27 pm
by jmester
29 Replies
810 Views
Last post September 05, 2016, 08:54:22 pm
by jmester