Author Topic: bar and chain  (Read 534 times)

0 Members and 0 Guests are viewing this topic.

Offline dabchick1

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
bar and chain
« on: September 12, 2013, 05:28:20 am »
hello i have bought a neilsen MT-7777 Chainsaw (here in england ) and can not find out what oregon bar and chain will fit it.can anyone please help me.
many thanks Barbara

Share on Facebook Share on Twitter


Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: bar and chain
« Reply #1 on: September 12, 2013, 06:56:13 am »
hello and welcome to the forum! :)
what you have is one of the many versions of the same chainsaw. I don't recall the actual manufacturers name, but other than the color, they're all the same. the bar/chain combo's they come with are pretty much the same. they all seem to use .325, but the length differs from 16"-20". unless reach is needed, i'd use a 16" bar/chain on that saw.

this is for a 'gio' branded version. same saw, different color:

a good combo kit for that is pn#108579
here's the link to the American Oregon page:
http://www.oregonproducts.com/pro/products/combos/combo_108579.htm

do you have any small engine or ope dealers around you? they might have something hanging on the wall for you.
when I grow up, i wanna be an adult.

Offline dabchick1

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: bar and chain
« Reply #2 on: September 12, 2013, 07:13:42 am »
hello,and thank you so much, could you possibly give me the reference number for an oregon 12" bar and chain so i can order it here online.as i am somewhat curtailed in the traveling department.
many thanks

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 248
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dabchick1

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: bar and chain
« Reply #4 on: September 12, 2013, 08:09:00 am »
hello,thank you for your time and trouble, but those references appear to be for a 16" bar and chain, i require a 12" bar and chain,would you know the reference number for these.
many thanks

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 248
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dabchick1

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: bar and chain
« Reply #6 on: September 12, 2013, 11:43:12 am »
thank you so very very much xxx

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: bar and chain
« Reply #7 on: September 12, 2013, 05:25:09 pm »
woops! I didn't realize the saw you were talking about was smaller than the "52cc" version :D
now the question is: does this saw use .325 or 3/8lp? ???

is the saw you have similar to this one?
http://www.amazon.co.uk/Chain-Petrol-300mm-25-4cc-2-Stroke/dp/B008C7RB0K/ref=sr_1_1?s=diy&ie=UTF8&qid=1379020849&sr=1-1&keywords=Neilsen+chainsaw
 

or this one?



if either one, it'll need the 3/8lp
when I grow up, i wanna be an adult.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 248
  • For The Love Of Chainsaws
  • Location: NCO
Re: bar and chain
« Reply #8 on: September 12, 2013, 06:25:46 pm »
There's a lot more 3/8" Low Profile options out there than .325" in the really short bars.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dabchick1

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: bar and chain
« Reply #9 on: September 13, 2013, 04:02:39 am »
this one http://www.millertools.co.uk/neilsen-12-petrol-chainsaw-with-neilsen-bar--chain-33708-p.asp
below is the reply from supplier.
Hi there and thank you for your email. I know that it is a 325 pitch but not sure about the gauge. I hope this helps.
Kind regards

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
1707 Views
Last post October 25, 2012, 08:35:25 pm
by Cut4fun .
0 Replies
119 Views
Last post April 07, 2016, 01:45:10 pm
by Cut4fun .
5 Replies
64 Views
Last post November 01, 2017, 04:07:15 pm
by HolmenTree
3 Replies
69 Views
Last post November 18, 2017, 03:25:47 pm
by 660magnum
8 Replies
132 Views
Last post February 20, 2019, 06:33:49 pm
by HolmenTree
2 Replies
83 Views
Last post March 30, 2018, 06:06:07 pm
by 3000 FPS
12 Replies
162 Views
Last post May 28, 2018, 09:23:50 pm
by 3000 FPS
3 Replies
135 Views
Last post April 15, 2018, 03:14:35 pm
by dpjones
0 Replies
67 Views
Last post June 07, 2018, 09:29:37 am
by Cut4fun .
8 Replies
86 Views
Last post May 02, 2019, 01:48:14 pm
by Philbert