Chainsaw Repair

This is my bow bar that I plan to use on my Husqvarna 371.
Facts: Unknown actual brand but was a one sided D276 for a McCulloch. 14" diameter
           
           Original oil hole was welded up and redrilled farther away from the slot at the D009 distance (the hole closer to the bar throat)
           A second oiler hole was drilled and cross drilled (away from the bar throat)
           Bar was sanded bare and repainted in TSC Kubota orange
           Broke and spun a loop of Stihl 3/8" X 85 DL X .050" X RS chain shown on bar
           This bow bar oils very well with the two oil holes.