Author Topic: PS PS3 Rd 1 Rd2 Chain build off  (Read 10189 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
PS PS3 Rd 1 Rd2 Chain build off
« on: September 29, 2015, 06:11:32 pm »
CHAINS MUST BE RECEIVED NO LATER THEN DEC 17TH 2015 AT 8PM

Thinking of doing a chain build off using any picco 3/8LP chain you desire.  IMO you would be nuts not to use stihl PS or at least PS3.  :P

All chains will be videoed and shown here and all chains will have times posted. If you cant live with that DO NOT enter. ;)

Just like we have always done in the past years and everyone enjoys it. Times and video of each cut. Heck most of us own up to which video is our chain and times. Nothing to hide IMO.


PM me if you are interested or make a post here.

Thinking it will be stock 39cc-46cc saw and 45dl chain maybe to cut a 8x8 or 10x10 cant.   I need to check IF 45dl will fit a 3/8 7T rim first on 39cc 46cc.  Might have to go with a 6T spur on a 46cc. Hmmm

Just in the testing the water stages for winter.  ;D

REDNECK Saw Repair Getter Done

Social Buttons


Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1948
  • Karma: 168
Re: Chain build off
« Reply #1 on: September 29, 2015, 06:32:23 pm »
I'm in.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Chain build off
« Reply #2 on: September 29, 2015, 06:35:39 pm »
I sold everything I ever square filed with.   :'(

But I will tryn beg borrow but never steal to come up with something.
REDNECK Saw Repair Getter Done

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 171
Re: Chain build off
« Reply #3 on: September 29, 2015, 07:03:10 pm »
I'm game...

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 215
  • Magnesium and Iron.
  • Location: Northern California.
Re: Chain build off
« Reply #4 on: September 29, 2015, 07:50:35 pm »
This'll be interesting.



45DL of LP is 'standard' for a 12" bar on most smaller saws running A041 or K041 mount LP bars.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Chain build off
« Reply #5 on: September 29, 2015, 08:10:22 pm »
Yep that was my reason. ;)  45DL. I just need to check it will still work using a 3/8 7
REDNECK Saw Repair Getter Done

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1948
  • Karma: 168
Re: Chain build off
« Reply #6 on: September 29, 2015, 08:13:41 pm »
I'll try to find me a loop. Probably won't get to test run it first.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Chain build off
« Reply #7 on: September 29, 2015, 08:17:06 pm »
We got all winter for it.  Right now just getting us all prepared. No hurry Mike. ;)


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Chain build off
« Reply #8 on: September 29, 2015, 08:18:22 pm »
I got a friend I will call to check on some fresh cants before hand.  If not I will get them from a racer friend I used to order from.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20223
  • Karma: 440
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Chain build off
« Reply #9 on: September 29, 2015, 08:20:09 pm »
3/8LP 050   
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
32 Replies
1791 Views
Last post February 27, 2012, 10:21:43 pm
by mweba
15 Replies
962 Views
Last post July 03, 2012, 11:32:20 am
by Cut4fun .
4 Replies
173 Views
Last post February 24, 2013, 03:24:31 pm
by RoyM
0 Replies
199 Views
Last post April 05, 2013, 01:09:48 pm
by Cut4fun .
7 Replies
778 Views
Last post August 20, 2014, 06:05:07 am
by weimedog
0 Replies
93 Views
Last post October 01, 2015, 01:39:49 pm
by Cut4fun .
13 Replies
333 Views
Last post December 17, 2015, 03:35:35 pm
by rjames
634 Replies
2475 Views
Last post June 19, 2016, 11:22:13 am
by mdavlee .
48 Replies
718 Views
Last post October 14, 2016, 11:24:49 pm
by mdavlee .
4 Replies
268 Views
Last post November 14, 2017, 03:20:24 am
by Gregg MacPherson