Chainsaw Repair

......not sure what its supposed to look like.  y'all are secretive and stuff.

No secrets here, need to be able to file before you have secrets  . I just dont want to say anything IF someone is doing what I was told. I highly doubt anyone is though.

I cant find the small 3ci chain I was looking for. Completely polished smoothed down.

Pics I grabbed straight off the internet so take them for what they are worth.  NOT LP chain.

thanks for the photos cut4.

I think this is the 3ci chain while Cale was working on it still. This one won the 3ci build off.

Per Cale bloodontheice Took a couple hours this evening to start work on my chain
As you can see it started off as regular LGX Oregon chain, was
going use the Stihl, but this took alot less work.

This was all done with one of those goofy files, round files and a regular Oregon chain grinder

I have half of the cutters filed, tunneled and the backs of the teeth cut off, the rakers and chassis will need
some more cleaning up, and the teeth will need to be back dressed.

thanks for the photos cut4.

More from Cale's 3ci build.

Cale = I've got mine 95% done just need to set the raker height, and
touch it up hear and there.

I back dressed it today after I took this picture.

Dang just noticed there was 1 chain there that was slower then stock. Never caught that before.


Steve = We made 3 cuts with a stock chain and the times was 3.53 291 312 with a average of 3.18
a 2.60 2.41 2.40=2.47
b 2.50 2.69 2.40=2.53
c 3.00 2.76 2.65=2.80    POS #1 I thought would have been slower then stock. That chain was fubarred.
d2.28 2.35 2.25=2.29      POS #2
e 2.56 2.34 2.50=2.46
f 3.50 3.15 3.15=3.26
g2.38 2.31 2.44=2.37
h 2.18 2.25 2.28=2.23

That one picture is Andy Redprospector chain he posted many years ago.