Author Topic: 280RNDD025 won't fit  (Read 159 times)

0 Members and 0 Guests are viewing this topic.

Offline SDB777

  • 6 cube
  • ****
  • Posts: 191
  • Karma: 14
  • Hobby Sawyer
  • Location: Cabot, Arkansas
    • www.slabsblanksandboards.com
280RNDD025 won't fit
« on: February 08, 2014, 09:21:10 pm »
I have a small bar that use on my 064(280RNDD025)...it fits just fine.
Tried letting my new 056AVEQ try it on...it does not fit.


What the little I can find everywhere around the 'net, it should.....shouldn't it?  Any ideas....






Scott (yup, it's weird) B
Jonsered 2186
Jonsered 2094
Stihl MS250
Stihl 064
WoodMizer LT-28

www.slabsblanksandboards.com

Share on Facebook Share on Twitter


Offline DCC

  • 4 cube
  • **
  • Posts: 30
  • Karma: 2
  • Location: Kaleva MI
Re: 280RNDD025 won't fit
« Reply #1 on: February 08, 2014, 09:46:11 pm »
Both saws have same bar mount. It should fit. ???

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 280RNDD025 won't fit
« Reply #2 on: February 08, 2014, 09:49:55 pm »
It is supposed to fit?

Measure your bar studs? They may have been changed to the big Stihl?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline SDB777

  • 6 cube
  • ****
  • Posts: 191
  • Karma: 14
  • Hobby Sawyer
  • Location: Cabot, Arkansas
    • www.slabsblanksandboards.com
Re: 280RNDD025 won't fit
« Reply #3 on: February 09, 2014, 07:29:13 am »
It is supposed to fit?

Measure your bar studs? They may have been changed to the big Stihl?

It was cold and I must admit....my brain might not have been firing too well after that really awesome steak dinner.  So I'll have to measure the studs when the sun comes up.  At least my thinking seems to have been correct....it should have just slid right on and tightened down just fine.

Wouldn't this saw have the 'bigger' studs anyway?  Thought there was only two sizes....


Both saws have same bar mount. It should fit. ???

Whew, that makes three of us that are thinking along the same lines.  I know for a fact that it fits fine on my 064....it's a 'spare' for those 'just-in-case' moments.





Scott (need to order some more bars anyway) B
Jonsered 2186
Jonsered 2094
Stihl MS250
Stihl 064
WoodMizer LT-28

www.slabsblanksandboards.com

Offline SDB777

  • 6 cube
  • ****
  • Posts: 191
  • Karma: 14
  • Hobby Sawyer
  • Location: Cabot, Arkansas
    • www.slabsblanksandboards.com
Re: 280RNDD025 won't fit
« Reply #4 on: February 09, 2014, 07:42:10 pm »
Well here's a 'tickler'....

I took the bar off my 064(36" Oregon PowerMatch), and it fits just fine on the 056.  Took the 28" and put it on the 064, and it fits just fine too.  Figured I had one of those 'moments'....reversed everything and the 28 does not fit on the 056.....


I need to get a few more bars this week from Pinnacle Arborist Supply in Little Rock anyway.  I'll just get my Dremel out and ID the 28" bar for the 064(since it fits fine), and find something for the 'new kid'!  Need some more loops too!!





Scott (May is snoring on the couch) B
Jonsered 2186
Jonsered 2094
Stihl MS250
Stihl 064
WoodMizer LT-28

www.slabsblanksandboards.com

Offline SDB777

  • 6 cube
  • ****
  • Posts: 191
  • Karma: 14
  • Hobby Sawyer
  • Location: Cabot, Arkansas
    • www.slabsblanksandboards.com
Re: 280RNDD025 won't fit
« Reply #5 on: February 11, 2014, 06:57:48 am »
Pinnacle had everything I needed in stock!
They have moved to a new spot just down the road from where they use to be. Little big showroom and a little more storage in the back. It is nice to have a place close by!

Picked up a 24" Oregon and two loops. Bolted right up!


Scott (maybe the slot is barely undersized on the 28") B
Jonsered 2186
Jonsered 2094
Stihl MS250
Stihl 064
WoodMizer LT-28

www.slabsblanksandboards.com