Author Topic: Older Oregon bar mount patterns  (Read 162 times)

0 Members and 0 Guests are viewing this topic.

Offline old 040

  • 4 cube
  • **
  • Posts: 57
  • Karma: 11
Older Oregon bar mount patterns
« on: February 11, 2017, 05:21:44 am »
Wanted to see if anyone has any listings, pics or even a link to an old thread that would hold this info, I'm waiting on an earlier Oregon application guide I bought off the bay yesterday that may or may not have what I'm looking for, I know there's some multi mount patterns missing from the guide I have now, mount pattern 006 comes to mind, there are others, any help would be great.

Social Buttons


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17737
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Older Oregon bar mount patterns
« Reply #1 on: February 11, 2017, 09:48:44 am »
Tried here. http://www.acresinternet.com/cscc.nsf/673d78ec01557aea88256b00005457e6/e39f46cf37dbe4a088256e0d0051dd49?OpenDocument

I know I had a bunch of older mount stuff about 10 years ago. But that puter is no longer with me.
REDNECK Saw Repair Getter Done

Offline old 040

  • 4 cube
  • **
  • Posts: 57
  • Karma: 11
Re: Older Oregon bar mount patterns
« Reply #2 on: February 11, 2017, 10:13:31 am »
Tried here. http://www.acresinternet.com/cscc.nsf/673d78ec01557aea88256b00005457e6/e39f46cf37dbe4a088256e0d0051dd49?OpenDocument

I know I had a bunch of older mount stuff about 10 years ago. But that puter is no longer with me.
Yeah, I have most of all the mounts listed on Mikes site, trying to find the earlier five digit and some of the other odd numbers/letters that had been used.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Older Oregon bar mount patterns
« Reply #3 on: February 12, 2017, 05:44:46 am »
Very eager to see what you come up with Mark.

I still have that VI-123 we were discussing earlier.  If you're still interested in it let me know.  I'd forgotten about it until I saw your posts here...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Like Like x 1 View List

Offline old 040

  • 4 cube
  • **
  • Posts: 57
  • Karma: 11
Re: Older Oregon bar mount patterns
« Reply #4 on: February 12, 2017, 07:49:47 am »
Very eager to see what you come up with Mark.

I still have that VI-123 we were discussing earlier.  If you're still interested in it let me know.  I'd forgotten about it until I saw your posts here...
I did find a good running 123 so I kinda put it on hold for now, maybe a later down the road I'll snag it off of ya, damn CAD has been put'n a hurt on the wallet as of late!.. ;D

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 364
  • Karma: 36
Re: Older Oregon bar mount patterns
« Reply #5 on: February 14, 2017, 12:47:25 am »
Sprocket cross reference pdf
Like Like x 1 View List

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 364
  • Karma: 36
Re: Older Oregon bar mount patterns
« Reply #6 on: February 14, 2017, 12:49:25 am »
older carlton bar cross reference pdf
Like Like x 1 View List

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 364
  • Karma: 36
Re: Older Oregon bar mount patterns
« Reply #7 on: February 14, 2017, 12:51:07 am »
Windsor bar cross reference pdf
Like Like x 1 View List

Offline old 040

  • 4 cube
  • **
  • Posts: 57
  • Karma: 11
Re: Older Oregon bar mount patterns
« Reply #8 on: March 04, 2017, 06:02:29 am »
Thought I'd bump the thread....Since starting this thread the earliest application guide other than my early/mid 50's Oregon guide that I've come up with is from 1985, it does have many more of the multi mount patterns and some more of the oddball mounts which helps, but has no cross reference for the older 5 and 6 digit bar numbers, nor does it give a reason for the multi mount patterns, so I guess I'm on the lookout for a 70's application guide, these 5 and 6 digit bar codes must be from that time period, maybe even mid/late 60's.
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
949 Views
Last post June 17, 2011, 11:35:12 pm
by SawTroll
2 Replies
229 Views
Last post April 05, 2012, 05:13:02 am
by SawTroll
3 Replies
404 Views
Last post November 30, 2014, 10:42:34 pm
by mikehonda
Older stihl

Started by Cut4fun . « 1 2 » Stihl

10 Replies
462 Views
Last post July 12, 2014, 01:43:40 pm
by Cut4fun .
4 Replies
91 Views
Last post January 29, 2015, 01:19:29 pm
by Cut4fun .
9 Replies
177 Views
Last post May 02, 2015, 09:26:49 pm
by alsled
4 Replies
81 Views
Last post April 03, 2015, 09:25:53 am
by wild262
2 Replies
137 Views
Last post May 27, 2016, 08:47:44 pm
by chainsawlady
2 Replies
11 Views
Last post May 01, 2017, 01:46:25 pm
by Cut4fun .
0 Replies
81 Views
Last post May 07, 2017, 10:55:58 am
by Cut4fun .