Author Topic: Oregon D010 bar mount  (Read 140 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Oregon D010 bar mount
« on: April 26, 2017, 05:35:03 pm »
208XXXD010  Oregon powermatch

Guessing 20" 058 but wonder what the D010 mount?
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4044
  • Karma: 159
  • OHIO REDNECK
Oregon D010 bar mount
« Reply #1 on: April 29, 2017, 10:31:40 am »
208XXXD010  Oregon powermatch

Guessing 20" 058 but wonder what the D010 mount?

Found 20" 058 info.  D010

http://www.outdoorking.com/pages/Oregon/Oregon%20Chain%20and%20Bar%20Reference.pdf

Note: PowerMatch & Pro Solid Nose Bars may be stamped with XXX, ZZZ or Other as they can have different noses installed on the body,
there by changing the part number.

In a few cases where two bars would have the same length in their part numbers but different drive-link counts, the letter Z will be used in the
bar-mount description to distinguish between them (K095 and Z095 for example).







THE OREGON® BAR PART-NUMBERING SYSTEM
The Oregon 10 Digit Bar Part Numbers are printed on the bar package & etched on the bar body. Here is what each digit means:
   24    0    RN      D   D025
Length in Inches
Gauge
Oregon Bar Type
Nose Size
Bar Mount
8”
10”
11”
12”
14”
15”
16”
18”
20”
21”
22”
24”
25”
27”
28”
30”
32”
33”
34”
36”
37”
42”
0 = .050”
8 = .058”
3 = .063”
4 = .043”
ON POWER MATCH® PLUS
SPROCKET-NOSE BARS:
RN  =  Symmetrical replaceable sprocket-nose
RW =  Symmetrical replaceable sprocket-nose 
           with the Reduced Weight feature
GN =  Symmetrical replaceable sprocket-nose
           with Guard Mate® holes
ON POWER MATCH® PLUS
DOUBLE GUARD® SPROCKET-NOSE BARS:
RG  =  Double Guard® replaceable sprocket
            -nose
GG  =  Double Guard® replaceable sprocket-
            nose with Guard Mate® holes
ON OREGON® PRO
SYMMETRICAL SPROCKET-NOSE BARS:
PM  =  Symmetrical replaceable sprocket-nose
ON LASER TIP PLUS SOLID-NOSE BARS:
AT  = Solid nose with wear-resistant alloy laser
          welded around the tip
ON PRO-LITE® AND PRO-LITE® PLUS
LAMINATED SPROCKET-NOSE BARS:
SL  =  Sprocket-nose
GL  =  Sprocket-nose with Guard Mate® holes
ON LASER-LITE®
LAMINATED SOLID-NOSE BARS:
LA  =  Solid nose with wear-resistant alloy laser
welded around the tip
ON PRO 91®
SYMMETRICAL SPROCKET-NOSE BARS:
SP  =  Symmetrical sprocket-nose
GP  =  Symmetrical sprocket-nose with Guard
Mate® Holes
ON MICRO-LITE™ SPROCKET-NOSE BARS:
MP  =  Professional narrow-kerf laminated
            sprocket-nose
ML  =  Consumer narrow-kerf laminated
           sprocket-nose
ON DOUBLE GUARD®
CONSUMER SPROCKET-NOSE BARS:
PX  =  Double Guard® sprocket-nose
           (.325” chains and 3/8” 72-series chains)
GD  =  Double Guard® sprocket-nose with
            Guard Mate® holes
            (.325” chains and 3/8” 72-series chains)
SD  =  Double Guard® sprocket-nose (25 and 
           91)
DG  =  Double Guard® sprocket-nose with
            Guard Mate® holes (25 and 91 chains)
ON SPROCKET-NOSE
BARS
Nose Pitch    Tooth Count
A =  1/4”  = 10
B = .325” = 10, 11, or 12
D
=  3/8”  = 9, 10,  or 11
(72, 73, and 75
chains only)
E =  3/8”  = 7 or 9 (90SG
or 91VG/VS/LX
chains only)
F = .404” = 10 or 11
G = .325” = 12
H =  3/8”  = 11 (72, 73, and
75 chains only)
ON STANDARD BARS:
A041
A061
A064
A074
A089
A095
A218
A318
D007
D009
D010
D023
D024
D025
D033
D096
D176
D196
D276
E031
K041
K095
K218
Z095
ON INTENZ® BARS:
T041
T061
T074
T095
T218
T318
ON SOLID-NOSE
LASER TIP & LASER-
LITE® BARS:
Nose Radius
X  =   Extra small (.95”)
S  =   Small (1.12”)
M  =   Medium (1.33”)
L   =   Large (1.65”)
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Oregon D010 bar mount
« Reply #2 on: May 01, 2017, 01:46:25 pm »
Magnus had some info on the D010 mount.  = Bar mount in Oregon is D010. With a bit of work to the bar (Add bar tension hole) the D009 will work just as well.

Will do some comparing later.
REDNECK Saw Repair Getter Done

Online ray benson

  • 5 cube
  • ***
  • Posts: 130
  • Karma: 63
  • Retired Industrial Electrician
  • Location: Indiana
Re: Oregon D010 bar mount
« Reply #3 on: November 18, 2017, 10:37:14 am »
I have a 2005 Oregon parts catalog that shows a D010 bar mount.  Used on Partner 550,650,1655, P-65, P-70,P-85, P-100, R-11, R-21, R-40, R-420, S-50, S-55, S-65 and a few other Partner saws. Similar to the D009 mount with 2 extra bar stud  holes. A mid 1980's Oregon catalog lists the mount as an H010.

[ Guests cannot view attachments ]

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
1392 Views
Last post June 17, 2011, 11:35:12 pm
by SawTroll
18 Replies
1895 Views
Last post October 04, 2013, 10:49:37 pm
by Philbert
1 Replies
326 Views
Last post September 06, 2012, 02:19:05 pm
by Cut4fun
1 Replies
163 Views
Last post November 05, 2013, 12:38:23 am
by Eccentric
10 Replies
230 Views
Last post December 31, 2013, 06:13:12 pm
by 3000 FPS
4 Replies
136 Views
Last post April 03, 2015, 09:25:53 am
by wild262
8 Replies
190 Views
Last post June 17, 2015, 01:20:14 pm
by RoyM
15 Replies
601 Views
Last post September 09, 2015, 10:06:43 pm
by Eccentric
13 Replies
744 Views
Last post October 23, 2019, 10:56:27 am
by Cut4fun .
0 Replies
112 Views
Last post July 19, 2018, 01:40:56 pm
by Hoggwood