Author Topic: Square grind wheel finishes  (Read 542 times)

0 Members and 0 Guests are viewing this topic.

Offline Playinwood

  • 6 cube
  • ****
  • Posts: 246
  • Karma: 5
Re: Square grind wheel finishes
« Reply #10 on: January 02, 2013, 02:13:20 pm »
I'm seeing several other variables.

The inside vertical with the small salmon is a little on the sharp side.

The blue wheel is best overall finish to me?

It is probably camera color reflections but do I see a little blue on the gray waxed?

Inside angles are blunt with the white but would probably work well in the woods.

Camera angles cause distortion and outside vertical on the blue wheel looks wrong on the left cutter and correct on the right cutter and I know the vertical dresser angle would have likely been the same on all the wheels.

Nice cutter pictures and excellent attention to the beaks.

Part of my inquiry is wanting you to elaborate on the problems associated with changing to wheels of different diameters and having to move the slide assembly back and forth with the Razur Sharp II ? And what I can interrelate to my Silvey Swing Arm.

By loosening the bolt and sliding the holder closer to the wheel gives you a sharper top plate, I can get about 40 degree before I hit.
Great for play chain terrible for hardwood work stuff.
Salmon wheel seems to be the best for dollar value, the blue is best over all with the nicest finish, a couple of racers have built pretty darn nice chain with them.
My RS is sitting in the garage in cobwebs, maybe time to play with it again


Related Topics

  Subject / Started by Replies Last post
Degree wheel

Started by Al Smith « 1 2 » Tool Shed

16 Replies
Last post December 31, 2011, 03:41:13 pm
by Cut4fun .
177 Replies
Last post March 04, 2016, 04:45:17 pm
by dutchsawdoctor
190 Replies
Last post May 28, 2019, 06:55:52 pm
by 3000 FPS
8 Replies
Last post October 03, 2013, 09:25:44 pm
by JOE.G
24 Replies
Last post January 01, 2020, 03:27:35 pm
by Cut4fun .
7 Replies
Last post December 09, 2014, 05:36:54 pm
by mdavlee .
3 Replies
Last post August 31, 2016, 08:59:42 pm
by jmester
8 Replies
Last post September 23, 2017, 12:04:50 pm
by Cut4fun .
34 Replies
Last post December 17, 2017, 12:58:09 am
by Sierrawoodsman
7 Replies
Last post October 25, 2018, 09:58:34 pm
by HolmenTree