Author Topic: Tools for disassembling and reassembling saw chain (Read 366 times)

super44 · « **on:** June 03, 2012, 08:11:42 am »

What are the correct tools for this job. There seem to be many but what works best?

660magnum · « **Reply #1 on:** June 03, 2012, 12:57:11 pm »

Here is a fancy set up

https://www.baileysonline.com/itemdetail.asp?item=DURABSC&catID=

There is a cheaper spinner made on vice grip pliers that adjusts for different pitches intended for occasional use

http://www.northerntool.com/shop/tools/product_21961_21961

Here is a punch type breaker assembly and anvil

https://www.baileysonline.com/itemdetail.asp?item=ORF+39472&catID=

Here are the tie straps for the different pitch and gauges of chain

http://www.baileysonline.com/search.asp?SKW=orps%2Borts&catID=79

super44 · « **Reply #2 on:** June 03, 2012, 02:54:18 pm »

Thanks!

I think I may call on this one.
http://www.baileysonline.com/itemdetail.asp?item=SBC

Al Smith · « **Reply #3 on:** June 04, 2012, 03:06:15 pm »

There's a lot of methods .Probabley the oldest and still works is to grind the rivet head off and use a very thin chisel or screwdriver to pop the tie strap off .

Set your new preset and tie strap by peening the rivet head .Don't get in a hurry and thump it like you're driving a railroad spike with a track hammer now .Just steady blows well placed .If you do it right you'll have a hard time telling it from a spun rivet .

Chainsaw Repair

News:

Author Topic: Tools for disassembling and reassembling saw chain (Read 366 times)

super44

Tools for disassembling and reassembling saw chain

660magnum

Re: Tools for disassembling and reassembling saw chain

super44

Re: Tools for disassembling and reassembling saw chain

Al Smith

Re: Tools for disassembling and reassembling saw chain

Related Topics