Author Topic: Windsor speed tip  (Read 541 times)

0 Members and 1 Guest are viewing this topic.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Windsor speed tip
« on: March 20, 2016, 08:17:26 pm »
I have a good Windsor speed tip bar. It has 3 holes for the tip rivets. Will all the 3 hole bar tips fit. Like .325/3/8/.404. Seems like a nice bar. But the the tip is loose for the body and I don't have any rivets to fix it.
FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22058
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Windsor speed tip
« Reply #1 on: March 20, 2016, 08:28:20 pm »
Check into the carlton speed tips if it is one of the newer last run windsor bars.  The older windsor tips were different if I remember right.

I have some bars outside I could take pics if needed later.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22058
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Windsor speed tip
« Reply #2 on: March 20, 2016, 08:30:29 pm »
Yours like this carlton renamed from the winsdor bar.



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22058
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Windsor speed tip
« Reply #3 on: March 20, 2016, 08:33:06 pm »
or like this mini bars?

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22058
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Windsor speed tip
« Reply #4 on: March 20, 2016, 08:34:26 pm »
You just needing rivets? I have a bunch but dont what what tips they even go to.   I think there may be a size listed on them.
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: Windsor speed tip
« Reply #5 on: March 20, 2016, 10:09:40 pm »
The second pic is not there. The bar only has 3 holes in it the hold the nose on. The tip only takes 1 rivet to hold it on. Not sure what pitch it is as 3/8 lo pro .325/ 3/8 .404 does not fit the tip right. I can post a pic tomorrow of what I have. I am pretty sure it is .058 gauge witch I will have to get resized for what chain I run. Thinking of getting a new tip and rivets so I can make it what ever I want.
FEAR NO TREE. FEAR GOD.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22058
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Windsor speed tip
« Reply #6 on: March 21, 2016, 12:45:12 pm »
I embedded 2nd pic. 

1 rivet windsor = I'll have to dig deeper. I dont recall one of mine being like this.
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: Windsor speed tip
« Reply #7 on: March 21, 2016, 11:13:45 pm »
I will try and post a pic in the morning before I leave for work. The bar I have dose not look like those in the picture.
FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: Windsor speed tip
« Reply #8 on: March 22, 2016, 07:10:46 am »

FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2055
  • Karma: 157
  • Location: MD
Re: Windsor speed tip
« Reply #9 on: March 22, 2016, 07:15:06 am »
Plus I can not find a chain that fits the nose right. Maybe that is why someone pulled the rivet out of a brand new bar. Seems that the sprocket was not made right as the teeth spacing is not right.
http://www.ebay.com/itm/NEW-WINDSOR-SPROCKET-NOSE-BAR-TIP-3-8-PITCH-050-THRU-063-OEM-/171124970880?hash=item27d7d7d580:g:z2cAAMXQJK1SMUyq

I guess as long as it is an SRA tip it will fit the body of the bar.
FEAR NO TREE. FEAR GOD.

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
1048 Views
Last post November 28, 2011, 11:44:35 am
by bloodontheice
38 Replies
1956 Views
Last post February 13, 2019, 01:55:47 pm
by HolmenTree
8 Replies
221 Views
Last post April 18, 2016, 04:19:47 pm
by DefinitiveDave
3 Replies
2319 Views
Last post February 11, 2017, 03:39:09 pm
by Cut4fun .
2 Replies
172 Views
Last post October 30, 2017, 06:53:53 pm
by 3000 FPS
2 Replies
249 Views
Last post January 07, 2018, 08:12:37 pm
by jmester
18 Replies
338 Views
Last post January 20, 2018, 08:15:54 pm
by mdavlee .
0 Replies
133 Views
Last post June 07, 2018, 09:29:37 am
by Cut4fun .
3 Replies
109 Views
Last post July 01, 2019, 12:47:31 pm
by The Ripper
4 Replies
106 Views
Last post May 11, 2020, 10:39:15 pm
by 3000 FPS