Author Topic: What saw are you looking for ?  (Read 1193 times)

0 Members and 0 Guests are viewing this topic.

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 35
  • Location: Franklinton, Kentucky
Re: What saw are you looking for ?
« Reply #10 on: December 22, 2013, 06:09:16 pm »

I can only think of a couple that I really would like to have.
One would be a nice Echo twin.
The other would be a Dolmar or Jonsered ported by tree monkey.
I have saws ported by Brad, Randy, Jeremy and Andre and would just like to have one ported by Scott.

I'll get it in a few years.


Mike

Offline brokenbudget

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 65
  • Location: brockville ontario canada
Re: What saw are you looking for ?
« Reply #11 on: December 23, 2013, 07:35:22 am »

I can only think of a couple that I really would like to have.
One would be a nice Echo twin.
The other would be a Dolmar or Jonsered ported by tree monkey.
I have saws ported by Brad, Randy, Jeremy and Andre and would just like to have one ported by Scott.

I'll get it in a few years.


Mike


yeah but will they port a chip-a-saw? ;D VROOM VROOM!
I still want one. ;)
when I grow up, i wanna be an adult.

Offline JohnH1896

  • 4 cube
  • **
  • Posts: 31
  • Karma: 4
Re: What saw are you looking for ?
« Reply #12 on: December 31, 2013, 01:43:09 pm »
An older sthil 076 or something close to it, and a husky 2100, I know I'm a dreamer lol

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: What saw are you looking for ?
« Reply #13 on: December 31, 2013, 01:57:31 pm »
An older sthil 076 or something close to it, and a husky 2100, I know I'm a dreamer lol

Neither of those are too unobtainable.  Just takes patience.  My 2100CD came to me by accident, and several more have been available to purchase.  I've passed up many 075/076 saws.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1852
  • Karma: 122
  • Location: MD
Re: What saw are you looking for ?
« Reply #14 on: December 31, 2013, 05:24:03 pm »
I would not mind a nice mint 076 super and a 257 husky and a 394xp.
FEAR NO TREE. FEAR GOD.

Offline procarbine2k1

  • 4 cube
  • **
  • Posts: 31
  • Karma: 6
Re: What saw are you looking for ?
« Reply #15 on: January 11, 2014, 04:28:20 pm »
I wouldn't mind adding a decent 1130G to the stable...

Offline procarbine2k1

  • 4 cube
  • **
  • Posts: 31
  • Karma: 6
Re: What saw are you looking for ?
« Reply #16 on: January 11, 2014, 04:29:59 pm »
I would not mind a nice mint 076 super and a 257 husky and a 394xp.

Someone got a sweet deal on a 394XP in the AS classifieds. I don't need one by any stretch, but was tempted!

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: What saw are you looking for ?
« Reply #17 on: January 12, 2014, 10:17:43 am »
I would not mind a nice mint 076 super and a 257 husky and a 394xp.

I have a 257 Husky, gone through by me all new OEM parts! Runs quite well! PM if interested.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline bustedknuckles

  • 4 cube
  • **
  • Posts: 70
  • Karma: 11
Re: What saw are you looking for ?
« Reply #18 on: January 17, 2014, 05:45:55 pm »
I had been looking for an 036/MS361 but now after my 039 turned out pretty well I guess I'm not looking so hard. I don't really need anything for my line up as I filled the gaps.

The main type of saw I am always looking for is the 1127 series Stihls. I realize these saws are disparaged on the forums but they sell well and are relatively cheap to repair with Chinese parts. I haven't done a side by side comparison but I think the Chinese (hutzl) cylinders I put on these saws run stronger than the stock ones. (they look completely different inside as the aftermarket ones don't have the finger ports. At any rate, I buy them as I find them but good looking ones bring a high price even scored. I like to get them for about $50 if scored and I've paid as much as $200 for runners in the MS290 flavor.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3694
  • Karma: 133
  • OHIO REDNECK
Re: What saw are you looking for ?
« Reply #19 on: February 07, 2014, 07:16:55 pm »
Finally thought of a saw I might try and find. Poulan 2300AV.  Dont want the older 25 XXV ones or the CVA ones.   

So was there only the 2300 AV in this or was there 1800 2000 AV ones too. I have only seen pics of 2300 AV. 
REDNECK Saw Repair