Chainsaw Repair

I have posted on how I fixed the starter of this little Castor saw here
http://chainsawrepair.createaforum.com/ported-saws/recoil-spring-fix-for-deep-covers-and-thick-fingers/new/#new

However, After such a long time the tubes were dust. So I replaced them. But the carb was not drawing fuel. But the saw would stay alive as long as I kept squirting fuel into the carb.
I didnt want to risk damaging the carb so I made a Redneck cleaning tonic out of fuel, Polyurethane thinner, coconut oil and Carbon tetra chloride and used it as fuel to squirt. Unbelievably in 30 seconds the carb cleared itself and the saw is running by itself. Shut it off and tried it a couple of times. Starts up at first pull.
I now find there is no oil being pumped out.
Does anyone have a diagram for this saw that I could use.
https://drive.google.com/file/d/1ySde5y2xo-UJfL1l4--fSFGMdKTs_on_/view?usp=sharing