Author Topic: OLYMPYK 241  (Read 573 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
OLYMPYK 241
« on: December 05, 2013, 07:43:29 pm »
Trying to find info on how these are made IPL etc.  Guy had one with him today that was bought new in his family.  Trying to start it, noticed oil going on the floor.  Then he noticed it was coming out of the muffler.  Checked and it is gas mix in the fuel tank and bar oil in the oil tank. So somewhere she is sucking bar oil into the crankcase is my guess.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: OLYMPYK 241
« Reply #2 on: December 07, 2013, 07:52:24 am »
Look @ this IPL.  Doesn't show 241 but may be close enough.  234/244 pg. 11  http://www.efcopower.com/sites/default/files/233_IPL.pdf
Shep

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: OLYMPYK 241
« Reply #3 on: December 07, 2013, 10:57:28 am »
Thanks Shep.  That clears up what is going on.    8)

I told him just take it back and put on the shelf and I would give him a lighter poulan 1800 with 12" for trim use.  Figures in the storm colder weather passing through it wouldnt run right  :-\ since being tuned in warm months last used.
 So I told him I would let him know when to pick the 1800 up.  Didnt want it to be one of those PULL-on's everyone gives the name to them.
REDNECK Saw Repair Getter Done

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: OLYMPYK 241
« Reply #4 on: February 15, 2014, 06:16:27 pm »
So apparently it has a gasket between the 2 tanks? I messed with it some. I got it to pop off but the rewind is shot. I found new crank,crankcase,piston,rewind and basically everything on ebay. I havent pulled the trigger on any of it tho.

Online countryhog

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 15
  • Location: NW arkansas
Re: OLYMPYK 241
« Reply #5 on: February 15, 2014, 07:35:24 pm »
i picked up a 240 auto. cleaned it up, rebuilt the carb, runs good. its always a tossup between that and my poulan 2000. like em both real well.
now is never here but the past is always present.
semper fi ya'll

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: OLYMPYK 241
« Reply #6 on: February 15, 2014, 08:07:48 pm »
i picked up a 240 auto. cleaned it up, rebuilt the carb, runs good. its always a tossup between that and my poulan 2000. like em both real well.
I love my 241. 1st saw I ever ran. I was knee high to a grasshopper. I almost cut my thumb off with it. I was 11 or 12 yrs old luckily I had thick leather gloves on. My dad has a 264 he still uses. My uncle had a 284 I believe. I watched a running 264 go for $37 the other day.

Online countryhog

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 15
  • Location: NW arkansas
Re: OLYMPYK 241
« Reply #7 on: February 15, 2014, 11:01:08 pm »
i've got the 284 on my want list. also the 261 and .........
now is never here but the past is always present.
semper fi ya'll

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: OLYMPYK 241
« Reply #8 on: February 16, 2014, 08:04:35 am »
i've got the 284 on my want list. also the 261 and .........
I remember going to use the 284f when I was younger. My uncle said it needed rings and it was headed to the scrap pile. He said it was too old to get parts for. I wish I woulda known then what I know now.

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
716 Views
Last post May 04, 2012, 09:39:45 pm
by Adirondackstihl
10 Replies
1656 Views
Last post July 15, 2018, 08:30:23 pm
by ray benson
3 Replies
452 Views
Last post May 16, 2014, 06:29:20 am
by sharkey
11 Replies
932 Views
Last post February 12, 2015, 11:01:33 pm
by farmboy
2 Replies
395 Views
Last post October 24, 2015, 11:57:47 am
by Devron30
7 Replies
368 Views
Last post April 08, 2018, 01:42:45 pm
by bdhall79
1 Replies
105 Views
Last post May 04, 2020, 12:21:15 am
by countryhog