Author Topic: Remington PL-4 oiling issue (Read 149 times)

super44 · « **on:** November 02, 2017, 06:48:16 pm »

Paid 10.00 for thing and it runs OK, problem is oiling. Duckbill was a pile of black goo so I pealed it out and put in a new duckbill but it still will not pump oil. Even with oil in the tank the manual oiler will not pump oil to the bar. The line is clear from the manual pump to the bar but before that I would need to tear it down to check the lines. I'm not 100% sure the duckbill is the correct one but it is very close. Any thoughts on do I need to tear it down?

Thanks

super44 · « **Reply #1 on:** November 06, 2017, 02:04:44 pm »

Does the duckbill face the oil tank?

Cut4fun . · « **Reply #2 on:** November 06, 2017, 03:33:59 pm »

Remington pl-4 ipl http://s30387.gridserver.com/partsDiagrams/Remington%20PL-4.pdf

no help from me. maybe see something in ipl

super44 · « **Reply #3 on:** November 08, 2017, 11:05:17 pm »

Thanks for the reply. I put the pieces in a box on a shelf for now.

Chainsaw Repair

News:

Author Topic: Remington PL-4 oiling issue (Read 149 times)

super44

Remington PL-4 oiling issue

super44

Re: Remington PL-4 oiling issue

Cut4fun .

Re: Remington PL-4 oiling issue

super44

Re: Remington PL-4 oiling issue

Related Topics