Chainsaw Repair

i went thru the 346 results. this is what i came up with. there were two saws that in the list are with square ground chain on them so i wont count them in the tally.    the rules were any new in the box chain but some did not it to be round only. here is what my math came up with. i totalled the times beside each name and then threw out the worst time.

I tested stock chains out of the box in 8x8 and 10x10 RSLK, CL, RS, RSC, RSK etc, Not a whole lot of difference out of the box. The square was faster by a little but not by much over the RS RSC RSK chains. They were right there too.

  I'm thinking several hundredths difference per 1 cut and I dont think there was whole tenth, but my memory is getting bad and I could be wrong. Had all that stuff saved on racesaws till some  head ran it in the ground. 

http://www.youtube.com/watch?v=syUxLCNwgzo&list=PLCABF345B22C40C01&index=71&feature=plpp_video
this was the best time of the day

http://www.youtube.com/watch?v=BI8rAQFnXcM&list=PLCABF345B22C40C01&index=53&feature=plpp_video
this cut didn't count but was in the 24's
i built this saw for heavy fuel about 3 years ago

http://www.youtube.com/watch?v=xSt1fPtUNfE&list=PLCABF345B22C40C01&index=30&feature=plpp_video
this is the 7900 i built for jd(grandpatractor)
i beleave it also cut in the 24's for time

http://www.youtube.com/watch?v=MOolY3Y5Dqs&list=PL9B615A0F49F18682&index=4
681 solo built by copsy around 33 for time