Author Topic: Black Decker 20V  (Read 503 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17719
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Black Decker 20V
« Reply #20 on: March 17, 2016, 12:50:05 pm »
For some reason, it says to use a 4.5mm (5/64") diameter file, instead of the standard 1/8" for Type 91 chain (3/8 low profile and 0.050 gauge).  Oregon says the the cutter has a different profile.  I have it on my 10" cordless pole saw (40V), and use the 4.5mm file - it really cuts quite aggressively that way.  Might be worth investing in the odd size file?


Philbert

Making sure I am thinking right, but isnt  4.5mm = 11/64 file?
REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Black Decker 20V
« Reply #21 on: March 17, 2016, 01:52:09 pm »
Making sure I am thinking right, but isnt  4.5mm = 11/64 file?
Thanks for catching that!  Math in my head is not as fluid as it used to be!

I mean to say 5/32 on Type 91 chain, which would mean that the 'next size up' is 11/64 on Type 90 chain.  I try to think of common saw chain file sizes in 32's of an inch, but 1/8 was too low of a starting point - though it might be used as grinding wheel thickness. 11/64 and 13/64 are the more common, 'in-between' sizes.

4/32 (1/8); 5/32; 11/64; 3/16 (6/32); 13/64; 7/32; 1/4 (8/32).

1/8 is approximately 3.16 mm.
9/64 is approximately 3.5 mm.
5/32 is approximately 4.0 mm.
11/64 is approximately 4.5 mm.
3/16 is approximately 4.8 mm.
13/64 is approximately 5.16 mm.
1/4 is approximately 6.3 mm.
5/16 is approximately 8.0 mm.

Good reference:  https://www.pferdusa.com/info/PDF/CSF.PDF

Philbert
Informative Informative x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17719
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Black Decker 20V
« Reply #22 on: March 17, 2016, 02:07:35 pm »
I just used that link in a thread earlier. ;)
REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Black Decker 20V
« Reply #23 on: March 17, 2016, 07:43:45 pm »
The Oregon Type 90 chain is also sold in consumer packaging as 'R' chain (maybe pirates buy a lot of it?).  You would buy 'R40' for a 40 drive link loop. I know that Menard's carries some 'R' chain, and some of the B&D cordless tools, but not sure of the R40 package, and I did not see your chainsaw there.

Philbert

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17719
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Black Decker 20V
« Reply #24 on: March 18, 2016, 04:22:29 pm »
Dang I come home today from work and the wife had slayed 10 trees.   :o 8)  She said I love that little saw,  ;) ;D
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17719
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Black Decker 20V
« Reply #25 on: March 18, 2016, 06:34:30 pm »
Black Decker 20V LCS1020 IPL

REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Black Decker 20V
« Reply #26 on: March 18, 2016, 06:58:27 pm »
Black Decker 20V LCS1020 IPL

??? Where are the mice ???

Philbert
Funny Funny x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17719
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Black Decker 20V
« Reply #27 on: April 05, 2016, 02:58:45 pm »
After the power outage from the coon the other morning.  I wondered if they made a light that could run off these 20 volt batteries.  Found one that is LED only 70 lumens but says last 11 hours on 1 batt and we have 4 batts.

Yep I got one even though I have ton of flashlights and candles already.  Why not get some emergency use out of those batts just setting there.  8)

REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Black Decker 20V
« Reply #28 on: April 05, 2016, 07:23:53 pm »
Now you understand the idea of being 'invested' in a battery platform, or a 'family' of battery powered tools!

Philbert
Agree Agree x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
197 Views
Last post March 24, 2013, 03:04:52 pm
by dutchsawdoctor
0 Replies
342 Views
Last post August 04, 2013, 08:28:00 pm
by kr5258
2 Replies
222 Views
Last post January 09, 2014, 03:10:57 pm
by tommysp61
Back in Black 3.3

Started by Tractorsaw1 « 1 2 3 4 5 » Poulan

44 Replies
610 Views
Last post February 23, 2014, 10:48:42 pm
by 3000 FPS
9 Replies
120 Views
Last post February 04, 2015, 12:37:31 pm
by Cut4fun .
2 Replies
211 Views
Last post March 23, 2016, 08:07:48 pm
by Cut4fun .