Author Topic: Husqvarna Battery Powered T536 vs Gas Powered T435  (Read 2609 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #30 on: August 09, 2014, 06:27:54 pm »
One's quiet and can be ran indoors, while the other is cheaper and cuts a hell of a lot more wood.8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #31 on: August 09, 2014, 06:52:07 pm »
One needs gas (but not with too much ethanol, please. Or stuff that is too old, thank you); floods; requires repetitive, rapid jerking on a starter rope, choking and purging while it is held in your crotch, or thrown/drop started; needs periodic spark plug gapping and maintenance, air cleaner cleaning, tune ups, and maybe points adjustments; need carb adjustments when you change altitude, or the temperature drops; puts out toxic CO smoke; is a fire hazard in your house; is too loud to hear co-workers over; gets hot and shoots sparks that can start forest fires; leads to vibration related nerve damage and hearing loss; can be lean seized or straight gassed; and has led to the creation of a large library of curse words.

The other starts when you squeeze the trigger.  And stops when you release it.

Philbert

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #32 on: August 09, 2014, 08:57:28 pm »
LOL...


Easy tiger.  My 'comparison' had positive points for each one.  Yours.......... ;D

-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17732
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #33 on: August 09, 2014, 10:13:41 pm »
Adam you can hear the noise that the oregon puts off in my video. Oregon sent me one to test out in 2011. I cut a brick with it, resharpened with their system even though not as good as before. But I couldnt have did that with my regular saw and chain.

https://www.youtube.com/watch?v=zaffJf5A0-M

REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #34 on: August 09, 2014, 10:20:02 pm »
Quote
My 'comparison' had positive points for each one

The gas saws have more power (torque and speed) per pound and per $ of purchase cost.  For now.

I have gas saws.  I have corded electric saws.  I have battery saws.  Each has its advantages and limitation.  Lotta guys like to make fun of the electric saws without having used one, or only have used one of the cheapies.

Philbert

(Photo is first STIHL chainsaw - electric!)

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #35 on: August 09, 2014, 10:46:30 pm »
Good info guys.  Thank you. ..

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #36 on: August 09, 2014, 10:46:46 pm »
I wasn't making fun of it Phil.  Heck a few posts back I was sayin' that I may have a need for the Husky...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #37 on: August 09, 2014, 11:38:28 pm »
I'm waiting on the hybrid! Lol

Online Philbert

  • Piped Saw
  • *****
  • Posts: 454
  • Karma: 61
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #38 on: August 10, 2014, 12:07:38 am »
Quote
I wasn't making fun of it Phil.

No offense taken. Hope you did not take any either.

Just an automatic response after 'defending' corded and battery saws in these forums.  Heck, I even use manual saws. 
And the best power saw for some trimming/thinning is actually a Sawzall with a pruning blade: gets in-between tight limbs and brush (could be corded or battery)!

Philbert

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Husqvarna Battery Powered T536 vs Gas Powered T435
« Reply #39 on: August 10, 2014, 02:20:01 pm »
Quote
I wasn't making fun of it Phil.

No offense taken. Hope you did not take any either.

Just an automatic response after 'defending' corded and battery saws in these forums.  Heck, I even use manual saws. 
And the best power saw for some trimming/thinning is actually a Sawzall with a pruning blade: gets in-between tight limbs and brush (could be corded or battery)!

Philbert

I've used my Super Sawzall to prune bushes and small trees in places where I couldn't run a gas saw.  Worked surprisingly well.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
75 Replies
5319 Views
Last post March 12, 2017, 08:11:21 pm
by Eccentric
2 Replies
201 Views
Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
2 Replies
761 Views
Last post July 29, 2012, 01:15:45 pm
by Al Smith
0 Replies
190 Views
Last post September 16, 2012, 04:19:27 pm
by mweba
3 Replies
162 Views
Last post October 18, 2013, 01:14:29 pm
by Cut4fun .
15 Replies
1380 Views
Last post February 28, 2017, 10:26:34 am
by Cmtrey
1 Replies
139 Views
Last post October 05, 2014, 02:47:25 pm
by RoyM
9 Replies
246 Views
Last post January 23, 2015, 11:04:02 pm
by Cat-Face Timber
4 Replies
354 Views
Last post March 18, 2016, 07:01:25 pm
by Philbert
4 Replies
98 Views
Last post April 15, 2017, 11:35:56 am
by Cut4fun .