Author Topic: Oregon Stihl Husky battery powered trim saws  (Read 5355 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17952
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Oregon Stihl Husky battery powered trim saws
« Reply #70 on: March 01, 2017, 06:00:57 pm »
Here is the dealer set ups they were to put up.

REDNECK Saw Repair Getter Done

Online Philbert

  • Piped Saw
  • *****
  • Posts: 470
  • Karma: 61
Re: Oregon Stihl Husky battery powered trim saws
« Reply #71 on: March 01, 2017, 10:17:13 pm »
My STIHL dear is pretty much a 'pro' shop.  I guess that these could help bring in more homeowner customers, but not sure how they would handle each other!

Philbert

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Oregon Stihl Husky battery powered trim saws
« Reply #72 on: March 03, 2017, 12:31:28 pm »
We demoed the new brushless Makita saw a few weeks back and found it to be pretty impressive for battery powered, but havent ran anyone elses to compare it to. We did notice that it has an overload protection on the motor and trying to push to hard it would kick out and force you to release the trigger to reset it, kinda annoying but if it keeps the motor from overheating and helps provide a long service life then its worth it.

I have a few of them ordered and should be in next week. We are planning on doing a little comparison video of it to the PS-32. See how it stacks up for cut times and battery life compared to a gas counterpart.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Useful Useful x 1 View List

Online Philbert

  • Piped Saw
  • *****
  • Posts: 470
  • Karma: 61
Re: Oregon Stihl Husky battery powered trim saws
« Reply #73 on: March 03, 2017, 02:24:16 pm »
We demoed the new brushless Makita saw a few weeks back and found it to be pretty impressive for battery powered, but havent ran anyone elses to compare it to. We did notice that it has an overload protection on the motor and trying to push to hard it would kick out and force you to release the trigger to reset it . . .
Side-by-side is really the only way to compare these saws.  Too easy to get bamboozled by Volts, Amps, and other ratings, or by marketing claims. Most battery saws have the overload protection, I believe; need to have a sharp chain and let the saw do the work.

Philbert

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17952
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Oregon Stihl Husky battery powered trim saws
« Reply #74 on: March 06, 2017, 08:35:57 pm »
That 36 volt  makita is shown here. Nate was showing a poster of it.  http://www.coptool.com/makita-and-dolmar-are-merging-into-a-single-brand/
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2037
  • Karma: 199
  • Magnesium and Iron.
  • Location: Northern California.
Re: Oregon Stihl Husky battery powered trim saws
« Reply #75 on: March 12, 2017, 08:11:21 pm »
We demoed the new brushless Makita saw a few weeks back and found it to be pretty impressive for battery powered, but havent ran anyone elses to compare it to. We did notice that it has an overload protection on the motor and trying to push to hard it would kick out and force you to release the trigger to reset it, kinda annoying but if it keeps the motor from overheating and helps provide a long service life then its worth it.

I have a few of them ordered and should be in next week. We are planning on doing a little comparison video of it to the PS-32. See how it stacks up for cut times and battery life compared to a gas counterpart.

Nathan have you ran the Echo electric chainsaw yet?
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
35 Replies
2456 Views
Last post May 31, 2015, 11:56:07 am
by Cut4fun .
52 Replies
2645 Views
Last post November 28, 2014, 11:48:40 pm
by Eccentric
4 Replies
199 Views
Last post August 12, 2013, 10:10:23 pm
by Cut4fun
15 Replies
1499 Views
Last post February 28, 2017, 10:26:34 am
by Cmtrey
1 Replies
139 Views
Last post October 05, 2014, 02:47:25 pm
by RoyM
2 Replies
98 Views
Last post February 16, 2015, 02:53:59 pm
by Eccentric
4 Replies
357 Views
Last post March 18, 2016, 07:01:25 pm
by Philbert
4 Replies
102 Views
Last post April 15, 2017, 11:35:56 am
by Cut4fun .
3 Replies
518 Views
Last post February 11, 2017, 03:39:09 pm
by Cut4fun .
5 Replies
122 Views
Last post June 15, 2017, 05:42:50 pm
by Philbert