Author Topic: 6401 oiler (Read 564 times)

treeslayer2003 · « **on:** October 21, 2015, 07:22:51 pm »

can y'all help me with this? i have no clue where to get parts and have never worked on a dolmar. i assume i need a husky socket to remove the clutch and probably some kind of kit for the oiler.......it just quit all together.

660magnum · « **Reply #1 on:** October 21, 2015, 08:25:06 pm »

The Husqvarna 372 socket will take the clutch off.

@Nathaniel Vansickle on this forum can furnish you parts

Nathaniel Vansickle · « **Reply #2 on:** October 21, 2015, 08:32:51 pm »

jared did a really good thread over on AS. http://www.arboristsite.com/community/threads/dolmar-makita-oil-pump-upgrade-modification.264696/ look through it and see if that helps. the little nub on the plastic piece is known to wear/break. repair kit is NLA so you either have to modify or replace the whole oil pump assy.

treeslayer2003 · « **Reply #3 on:** October 21, 2015, 10:17:44 pm »

Quote from: Nathaniel Vansickle on October 21, 2015, 08:32:51 pm

jared did a really good thread over on AS. http://www.arboristsite.com/community/threads/dolmar-makita-oil-pump-upgrade-modification.264696/ look through it and see if that helps. the little nub on the plastic piece is known to wear/break. repair kit is NLA so you either have to modify or replace the whole oil pump assy.

it seems logical to me that that plastic nub is probably gone. i can handle the plunger grind but is there no replacement adjuster available? did mr. Jared make them for sale?

660magnum · « **Reply #4 on:** October 22, 2015, 12:07:55 am »

http://www.ebay.com/itm/Dolmar-030245070-Oil-Pump-Rebuild-Kit-Chainsaw-PS-6400-PS-7900-/291303127703?hash=item43d304fa97:g:lFAAAOSwkNZUb5ky

Nathaniel Vansickle · « **Reply #5 on:** October 22, 2015, 09:05:12 am »

The have been NLA for a couple years but i just checked the new Makita crossover and they are available. Apparently Power Distributors just didnt want to stock them.

treeslayer2003 · « **Reply #6 on:** October 22, 2015, 02:47:39 pm »

Nathaniel when you get a chance, could you put together a price on what you think i should need to rehab this oiler including any lines please? PM me the price and how to pay and i will send you my mailing address.
i am in zip 21632 for shipping.

660magnum · « **Reply #7 on:** October 22, 2015, 03:04:14 pm »

the desirable lines are the green rubber ones

Nathaniel Vansickle · « **Reply #8 on:** October 22, 2015, 07:46:03 pm »

Quote from: treeslayer2003 on October 22, 2015, 02:47:39 pm

Nathaniel when you get a chance, could you put together a price on what you think i should need to rehab this oiler including any lines please? PM me the price and how to pay and i will send you my mailing address.
i am in zip 21632 for shipping.

I am sending in an order tomorrow if you can wait a few days. We dont have availability/stock from makita right now. just what a crossover page tells us. It says the oiler rebuild kit is a valid part number but since it has been NLA from PD for 2-4 yrs i dont trust the Makita site. Lets find out if it shows up with my order. I have the lines and a complete pump in stock but that rebuild kit is 1/4 the price of the pump.

treeslayer2003 · « **Reply #9 on:** October 22, 2015, 10:22:53 pm »

sure, just let me know what ya come up with. and thanks.

Chainsaw Repair

News:

Author Topic: 6401 oiler (Read 564 times)

treeslayer2003

6401 oiler

660magnum

Re: 6401 oiler

Nathaniel Vansickle

Re: 6401 oiler

treeslayer2003

Re: 6401 oiler

660magnum

Re: 6401 oiler

Nathaniel Vansickle

Re: 6401 oiler

treeslayer2003

Re: 6401 oiler

660magnum

Re: 6401 oiler

Nathaniel Vansickle

Re: 6401 oiler

treeslayer2003

Re: 6401 oiler

Related Topics