Author Topic: Dolmar 120si clutch (Read 363 times)

3000 FPS · « **on:** January 11, 2018, 07:40:18 pm »

I have a Dolmar 120si that uses the 3 shoe clutch. I broke one of the clutch shoes and need just the shoe or I would go for a complete clutch.
If anyone has a parts saw or clutch they are not in need of. Thanks.

Cut4fun . · « **Reply #1 on:** January 11, 2018, 08:46:50 pm »

https://store.chainsawr.com/products/dolmar-117-chainsaw-clutch-sprocket-assembly

3000 FPS · « **Reply #2 on:** January 11, 2018, 09:09:07 pm »

Quote from: Cut4fun . on January 11, 2018, 08:46:50 pm

https://store.chainsawr.com/products/dolmar-117-chainsaw-clutch-sprocket-assembly

Will give it a shot.

Cut4fun . · « **Reply #3 on:** January 11, 2018, 09:46:13 pm »

Got a question. Searching 120si IPL no 3 shoe shown. But on 120 120s showed 3 and 2.

Is it one of those deals like poulan 3 shoe and 2 shoe on 380 3450 3750 etc?

3000 FPS · « **Reply #4 on:** January 11, 2018, 10:37:41 pm »

Quote from: Cut4fun . on January 11, 2018, 09:46:13 pm

Got a question. Searching 120si IPL no 3 shoe shown. But on 120 120s showed 3 and 2.

Is it one of those deals like poulan 3 shoe and 2 shoe on 380 3450 3750 etc?

Yep I noticed that too. It could be like the poulans but I do not know for sure. I am hoping the crank size for the clutch is the same on the 120 and 120 super.
the 120 is only 60cc and the 120 super is 68cc. We shall see.

3000 FPS · « **Reply #5 on:** January 12, 2018, 01:48:22 pm »

Well I have a Dolmar 119 here and decided to take the clutch off of it to see if it would work on the Dolmar 120si. Worked like a champ. I have to admit I was a bit skeptical but you never know.

The Models as they were developed. First was the 119 then the 120 then the 120 super and then the 120 super injector or si.
It is good to know that the clutch from a 119 will fit the 120si. So the one I got from Chainsawr should work great.
I did notice the clutch shoes themselves are a little bit different so you cannot interchange the shoes but if replacing the entire clutch then no problem.

You would never know this from looking at the parts list.

Cut4fun . · « **Reply #6 on:** January 12, 2018, 02:34:32 pm »

Good to know the info. Roger want me to move this to the dolmar board now so others will know from it?

3000 FPS · « **Reply #7 on:** January 12, 2018, 03:19:49 pm »

Quote from: Cut4fun . on January 12, 2018, 02:34:32 pm

Good to know the info. Roger want me to move this to the dolmar board now so others will know from it?

Yep I was thinking the same thing. Good info to share in the Dolmar thread. Thanks.

Cut4fun . · « **Reply #8 on:** January 18, 2018, 12:01:06 pm »

Saving info Fred and Kensie shared in the CRG

The first gen 120 was 61cc, then became the 119 then the all red 117. At that same time, a new longer stroke 120s 68cc came out. Which lead into the next (same stroke but cc & ignition change, amoung a couple other things) gen SI's...60cc & 68cc. Several different clutches used & inter change as a whole. Hope this helps.

On the crankcase an SI will have two oiler channels for two different bar mounts

How to tell if a original SI saw

pics below

660magnum · « **Reply #9 on:** January 18, 2018, 12:07:59 pm »

keep in mind there is very little difference between the 116Si/120Si and the newer 6000i/6800i except the brake. It is even hard to tell them apart without the numbers on their side.

Chainsaw Repair

News:

Author Topic: Dolmar 120si clutch (Read 363 times)

3000 FPS

Dolmar 120si clutch

Cut4fun .

Re: Dolmar 120si clutch

3000 FPS

Re: Dolmar 120si clutch

Cut4fun .

Re: Dolmar 120si clutch

3000 FPS

Re: Dolmar 120si clutch

3000 FPS

Re: Dolmar 120si clutch

Cut4fun .

Re: Dolmar 120si clutch

3000 FPS

Re: Dolmar 120si clutch

Cut4fun .

Re: Dolmar 120si clutch

660magnum

Re: Dolmar 120si clutch

Related Topics