Author Topic: Dolmar 133  (Read 1362 times)

0 Members and 0 Guests are viewing this topic.

Offline Laurie

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Dolmar 133
« on: September 24, 2012, 02:45:21 pm »
My Brother has an old Dolmar 133 which has little use and is in good condition. The coil has stopped working (it is a double coil) and he is having a problem trying to replace it. Does anyone know where he could get one from please

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23980
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 133
« Reply #1 on: September 24, 2012, 04:16:22 pm »
Welcome to the site and good luck finding these parts.  Some info I dug up that might help you.

copy and pasted info below from others



Dolmar 133 Super has no spark,  pulled the flyweel off and found that the trigger and the coil are both Bosch units. The trigger has part number 1 217 280 112 and the coil 2 204 211 135. correct me if I am wrong but I think that both these parts are discontinued and have been replaced by the SEM ignition assembly part number 119 140 210 which includes the flywheel and the mag. plate assembly.

the old Bosch unit is NLA from the dealers and only luck would find an NOS unit sitting somewhere.
Any dolmar dealer should be able to get the SEM unit for you if they are still avaliable. My 133 was without spark and I got a setup from a dolmar 309 cut off saw that put the spark back into the 133 and its a good runner again.

 I have suceeded in reviving a Dolmar 120 with the same ignition module part number.
The coil tested perfect and I replaced the trigger unit with a module ATOM similar to what has been used on many other small engines.
The saw works again perfectly.
The module I used is similar to OREGON 33-053 but a 1 wire version.

Offline Laurie

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Re: Dolmar 133
« Reply #2 on: September 25, 2012, 07:18:34 am »
Thank you very much for the information, it is very helpful.

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: Dolmar 133
« Reply #3 on: September 25, 2012, 06:30:14 pm »
A Stihl 056 coil is also the same. The last 133 I got going I had to put a 143 coil/flywheel in it and it works fine. Keep an eye on ebay, they come up for sale every once in a while...

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
817 Views
Last post December 19, 2013, 08:36:56 pm
by fastleo151
21 Replies
4569 Views
Last post May 31, 2014, 10:52:19 am
by man of stihl
13 Replies
1650 Views
Last post January 11, 2014, 06:09:41 pm
by Bitburger
73 Replies
3370 Views
Last post July 03, 2014, 12:15:14 pm
by Cut4fun .
Dolmar parts

Started by aclarke « 1 2 » Dolmar Makita

11 Replies
1669 Views
Last post April 23, 2014, 11:50:04 am
by KilliansRedLeo
8 Replies
1024 Views
Last post August 26, 2014, 12:14:10 am
by stihls066
8 Replies
1674 Views
Last post May 24, 2014, 12:12:54 am
by dutchsawdoctor
0 Replies
253 Views
Last post April 12, 2014, 12:28:35 am
by stihls066
3 Replies
805 Views
Last post April 21, 2014, 09:22:19 pm
by 3000 FPS
3 Replies
568 Views
Last post April 22, 2023, 10:56:40 am
by Cut4fun .