Author Topic: dolmar 5105 piston....solid or windows?  (Read 2820 times)

0 Members and 23 Guests are viewing this topic.

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #30 on: February 12, 2014, 06:14:04 pm »
I find it hard to believe that there isn't another zama or other nozzle that won't work?  Push the nozzle out and remove the check valve and give it a try too

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #31 on: February 12, 2014, 06:32:23 pm »
Is it a C1Q ZAMA?

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #32 on: February 12, 2014, 06:41:19 pm »
If so, look into the AA007157 nozzle/check valve

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #33 on: February 12, 2014, 06:51:01 pm »
I'm curious now!! When you let off the throttle and it dies, what does it take to re-Start the Saw?  Choke? No choke and crank with throttle open?  Adam

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS

  • Total Badges: 21
    Badges: (View All)
    Level 5 Poll Voter Second year Anniversary 100 Posts 50 Posts Level 4
Re: dolmar 5105 piston....solid or windows?
« Reply #34 on: February 12, 2014, 07:42:34 pm »
YYes died after full throttle. ...few pulls no choke and it's idling again.  I have already pressed 1 out and it is bad. I will check that # out. It is a c1q dm14a....Thank you to all who have helped and big thanks to KRL, got the carb ordered....i will look at that part # tonight as even though I got a new carb I still would like to know if this fixes it for future reference.....it really should be a simple fix but starting to sound as if zama doesn't want it to be repairable....  i will post what I find out. ...on another note,  a Clarke love the avitar...big motorhead fan here!
Trapped in time, surrounded by evil, low on gas

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #35 on: February 12, 2014, 09:14:07 pm »
Weird, I was always under the impression that the check valve was only there to keep air from entering the wet side of the metering chamber at idle?  got into Motorhead back in the rowdy high school days!!

Let us know how thus pans out. Adam

There was a large batch of internally hairline **** zamas a while back...

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS

  • Total Badges: 21
    Badges: (View All)
    Level 5 Poll Voter Second year Anniversary 100 Posts 50 Posts Level 4
Re: dolmar 5105 piston....solid or windows?
« Reply #36 on: February 13, 2014, 06:10:42 am »

There was a large batch of internally hairline **** zamas a while back...
[/quote]
Was anything as far as reports or recalls put out about these? The good one I had was an 01a, bad being 57a,58a & 94a...sorry trying to quote off of my dumb/smart phone doesn't work very well. .....
Trapped in time, surrounded by evil, low on gas

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #37 on: February 13, 2014, 08:41:27 am »
I believe those were all in the stihl ms200t saws.

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS

  • Total Badges: 21
    Badges: (View All)
    Level 5 Poll Voter Second year Anniversary 100 Posts 50 Posts Level 4
Re: dolmar 5105 piston....solid or windows?
« Reply #38 on: February 18, 2014, 05:11:12 am »
Checked the zama site and just about every 2 c1q carbs the part # for this part changes...Also every # is no longer available >:(......i did get into another c1q carb on my ps 34 this weekend and without popping it out the nozzles looked the same except this one was brass. I knew this carb was good just needed a kit so I didn't mess with it.  Guess zama just wants everyone to buy a new carb if these fail....they are still making them so they have the parts just won't distribute them....
Trapped in time, surrounded by evil, low on gas

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172

  • Total Badges: 25
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary 1000 Posts Second year Anniversary Level 5 500 Posts
Re: dolmar 5105 piston....solid or windows?
« Reply #39 on: February 18, 2014, 09:25:37 am »
Isn't zama Stihl owned? Can Zama C1 parts be purchased through a stihl dealer?

 

Related Topics

  Subject / Started by Replies Last post
72 Replies
9975 Views
Last post August 30, 2015, 01:21:23 pm
by Cut4fun .
2 Replies
1591 Views
Last post December 10, 2011, 10:38:37 pm
by 660magnum
1 Replies
1298 Views
Last post June 09, 2012, 11:26:16 am
by rms61moparman
23 Replies
2050 Views
Last post August 13, 2013, 04:43:43 pm
by EHP
8 Replies
836 Views
Last post March 17, 2014, 09:07:10 am
by fordfairlane78
2 Replies
742 Views
Last post June 19, 2014, 03:32:20 pm
by farmboy
3 Replies
248 Views
Last post March 13, 2015, 01:45:29 pm
by 660magnum
12 Replies
614 Views
Last post May 24, 2015, 08:38:38 pm
by OldJack
7 Replies
1610 Views
Last post April 08, 2016, 01:16:15 pm
by Cut4fun .
2 Replies
239 Views
Last post April 01, 2023, 09:46:59 am
by Cut4fun