Author Topic: Dolmar 6000i  (Read 2493 times)

0 Members and 69 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Dolmar 6000i
« on: May 05, 2012, 09:58:02 pm »
This is my 1997 Dolmar 6000i. I bought it used from the local dealer in April 2011. I have not done anything to it but install the outer spike. This one has the original 20" bar and a newer Stihl RSC chain.

It has the Tillotson carburetor with no choke but has a orifice valve that opens with what would be the choke lever. This valve lets the carburetor pump squirt fuel directly into the venturi. The chainsaw will normally start cold with the choke on. You can shut the choke off after the chainsaw starts.

This chainsaw looks a lot like the Dolmar 116/120 chainsaws which preceded it. It was the predecessor to the Dolmar 6400. The 6000i had a sibling in the Dolmar 6800i.

This particular one has heated handles with a toggle switch just under the starter handle.

It is a real sweetheart to use. A little on the heavy side with the handle heating apparatus but excellent power for a 60cc chainsaw. This example was a one owner trade in on a new 6400 and the guy was just a casual firewood cutter. The 6000i has few scratches or dings and leaks little bar oil.

The listed weight for the non heated version is 14.75 lbs power head only. Bore and stroke is 46mm X 36mm and the 6800 is 49mm X 36mm. with free running rpm at 13000.





We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Share on Facebook Share on Twitter

Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Dolmar 6000i
« Reply #1 on: May 05, 2012, 10:37:03 pm »
I loved running this 6000i 

The heated handles switch is 2nd pic above gas cap.  Heated handles still work.

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 38
  • Location: Franklinton, Kentucky

  • Total Badges: 22
    Badges: (View All)
    Third year Anniversary Level 5 Search Karma Good Second year Anniversary Mobile User
Re: Dolmar 6000i
« Reply #2 on: May 06, 2012, 12:03:54 am »
They are definitely a great saw!
The 6000 and 6800 are both very under-rated!


Mike

Offline wkpoor

  • 4 cube
  • **
  • Posts: 61
  • Karma: 2

  • Total Badges: 12
    Badges: (View All)
    Third year Anniversary Level 3 Karma Second year Anniversary Combination Topic Starter
Re: Dolmar 6000i
« Reply #3 on: May 06, 2012, 09:44:31 am »
Looks like a brandy new saw.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Dolmar 6000i
« Reply #4 on: May 06, 2012, 03:20:11 pm »
Just adding yesterdays pic I snapped after this saws use.  ;D






Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Dolmar 6000i
« Reply #5 on: February 01, 2015, 10:08:54 am »
Jim was looking for PHO weight. I think paper specs are a little off. LOL

years sold.

PS6000i   2003   $480.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   2002   $480.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   2001   $570.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   2000   $570.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   1999   $661.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   1998   $661.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   1997   $661.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21
PS6000i   1996   $659.00   
Engine Make:    Dolmar
   
Engine Size Cubic Centimeters:    60
   
Engine Size Cubic Inches:    3.6
Dry Weight:    13.2
   
Bar Oiler Type:    Automatic
   
Bar Length:    18-21


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Dolmar 6000i
« Reply #6 on: February 01, 2015, 10:21:46 am »
Mine was made in 1997 but I have the idea that the 1st owner didn't purchase it until a couple years later.

It also sat as a consignment at the Dolmar dealer almost 2 years before I bought it in 2010.

The dealer told me that the owner worked as a track man for the railroad. It looked like the owner had cut a lot of railroad cross ties with it? There were creosote stains all over it when I bought it. It came with a couple creosoted Stihl chains one of which I squared and gave to you.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Dolmar 6000i
« Reply #7 on: February 01, 2015, 10:34:44 am »
I think you gave me that 1 chain that was all blackened. It cleaned up when we were doing testing that day.  Only 1, and dont recall if you left it here or not.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Dolmar 6000i
« Reply #8 on: February 01, 2015, 10:43:23 am »
The cutters were real short on it. I don't have it. I was surprised how clean it was after only a few cuts. The creosote came right off.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio

  • Total Badges: 24
    Badges: (View All)
    Fourth year Anniversary Third year Anniversary Poll Voter Level 5 Second year Anniversary Signature
Re: Dolmar 6000i
« Reply #9 on: February 02, 2015, 05:08:01 pm »
i have a 6800i that came from Red Elm. have yet to put fuel in it and start it though.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1117 Views
Last post March 24, 2012, 11:18:52 am
by farmboy
12 Replies
2124 Views
Last post October 14, 2012, 06:43:27 am
by man of stihl
2 Replies
1382 Views
Last post July 24, 2012, 02:02:06 pm
by Cut4fun
6 Replies
1674 Views
Last post October 25, 2015, 09:31:29 pm
by mikehonda
3 Replies
1172 Views
Last post September 25, 2012, 06:30:14 pm
by adam32
Dolmar 119

Started by 3000 FPS « 1 2 3 4 5 » Dolmar Makita

42 Replies
5452 Views
Last post March 08, 2016, 11:11:25 pm
by 660magnum
1 Replies
371 Views
Last post December 07, 2013, 08:32:27 pm
by Cut4fun .
22 Replies
1924 Views
Last post September 05, 2013, 10:23:36 pm
by KilliansRedLeo
2 Replies
343 Views
Last post January 16, 2014, 01:07:14 am
by 660magnum
5 Replies
792 Views
Last post October 09, 2014, 10:09:19 pm
by 660magnum