Author Topic: Dolmar 6100  (Read 5625 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Dolmar PS6100
« Reply #60 on: January 25, 2014, 03:19:51 pm »
I noticed the 6100 started out just right on mixture but got lean as it heated up.

The 562XP had the mixture just right all the way through.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Dolmar PS6100
« Reply #61 on: January 28, 2014, 04:47:32 pm »
One of the guys in my shop just bought one so we should have some reviews on it the next time we go cut wood and be able to give updates as it breaks in. Plus I sent mine out for porting so that should make it interesting being able to run ported one side by side with a stock one
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar PS6100
« Reply #62 on: January 28, 2014, 04:55:47 pm »
Randy mastermind massaging it for you?    He is here too.  ;)

Get some video and make sure chains are on par to each other when testing.   stock to ported etc. 8)
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Dolmar PS6100
« Reply #63 on: January 28, 2014, 05:10:52 pm »
Yep. Whenever he gets to it. As strong as these run stock I bet when he gets done with it there will be a lot more interest in them. We both run carlton chain so we will put new on and test them. Rafe already decided if mine runs to good randy will get his too so we might not have a stock one to compare with long term
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar PS6100
« Reply #64 on: January 28, 2014, 08:12:10 pm »
All I care about is how they perform stock anymore.  Hard enough to get folks to spend money on a good saw, let alone the cost of porting one too.
 Just to save a few seconds in a cut. 
 Some will put a smile on your face though. But it takes a special kind of wow to do that anymore.  ;)
REDNECK Saw Repair Getter Done

Offline redmule

  • pruner
  • *
  • Posts: 3
  • Karma: 0
Re: Dolmar PS6100
« Reply #65 on: January 29, 2014, 04:37:44 am »
Nathaniel can you check what rpm your 6100 is set at. My 6100 is set at 13495 and this is to rich by the way the plug looks after about 8 tanks of gas. Thank you

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4050
  • Karma: 159
  • OHIO REDNECK
Re: Dolmar PS6100
« Reply #66 on: March 15, 2014, 11:38:40 am »
REDNECK Saw Repair

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Dolmar PS6100
« Reply #67 on: March 15, 2014, 12:40:10 pm »
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21893
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar PS6100
« Reply #68 on: March 15, 2014, 12:49:49 pm »
Thanks. I went through that manual for about 30pages and gave up.
 Must have missed it.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Dolmar PS6100
« Reply #69 on: March 15, 2014, 09:46:12 pm »
Been awhile but i haven't forgotten about giving an update.  I sold out of 6100 and  the warehouse was out so i sold my techs saw.  Hopefully have more coming in soon so i can replace his saw and by then I will have mine back from Randy to take a couple videos. 
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


 

Related Topics

  Subject / Started by Replies Last post
4 Replies
710 Views
Last post March 24, 2012, 11:18:52 am
by farmboy
12 Replies
1043 Views
Last post October 14, 2012, 06:43:27 am
by man of stihl
2 Replies
1006 Views
Last post July 24, 2012, 02:02:06 pm
by Cut4fun
6 Replies
1288 Views
Last post October 25, 2015, 09:31:29 pm
by mikehonda
3 Replies
628 Views
Last post September 25, 2012, 06:30:14 pm
by adam32
Dolmar 119

Started by 3000 FPS « 1 2 3 4 5 » Dolmar Makita

42 Replies
3236 Views
Last post March 08, 2016, 11:11:25 pm
by 660magnum
22 Replies
868 Views
Last post September 05, 2013, 10:23:36 pm
by KilliansRedLeo
Dolmar 112

Started by 3000 FPS « 1 2 3 4 » Dolmar Makita

31 Replies
1305 Views
Last post April 16, 2015, 10:41:34 am
by 3000 FPS
10 Replies
565 Views
Last post November 07, 2013, 03:40:00 pm
by farmboy
1 Replies
357 Views
Last post November 12, 2013, 01:38:11 pm
by Cut4fun