Author Topic: Dolmar 7300  (Read 167 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Dolmar 7300
« on: April 08, 2020, 07:37:57 am »
Dolmar 7300 back firing aka sheared key. Not needed. So cleaned up both sides lined up and tightened down. Coil gap imo to tight so just used my business card to reset gap. Fired right up and running.

REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter

Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 7300
« Reply #1 on: April 08, 2020, 04:02:24 pm »
Test cutting and wont go full throttle.

Well this saw has more issues. New boot was installed at a shop. The dang flange is broke and someone tried using a wrong size nut and basically slides onto the carb bolt.   So only 1 side was even securing the carb.

So got it torn apart with a new little bolt that fits the carb bolt and trying to redneck it into the flange. If this holds tommorrow I wont need to order a flange and 2 square nuts. 

Carb was full of fines on both sides too. Dont appear to been apart for a long time.   Might need a carb kit too.

Least the H side limiter is now grinded off.

https://www.ereplacementparts.com/makita-dcs7301-73cc-chainsaw-parts-c-97_98_245_9468.html?osCsid=evbp2mj3j98lh6n8l7tq0ppuf6

https://www.sawagain.com/dolmar-ps-630-6400-7300-7310-7900-7910-makita-dcs-6400-7300-7900-carburetor-manifold-flange-new-oem-038171041/

https://www.sawagain.com/dolmar-ps-630-ps-6300-ps-6400-ps-7300-ps-7310-ps-7900-ps-7910-makita-dcs-6401-dcs-642120-dcs-7301-dcs-7901-rb-122-zama-carburetor-kit/



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 7300
« Reply #2 on: April 08, 2020, 05:50:44 pm »
 The nut you could basically slide on the carb bolt. New nut  one that least goes on right.

Redneck fix for the win. Test cut with 24 full skip and 8t. I would do a 7t myself.



REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4481
  • Karma: 276
  • Location: Carpenter, Wyoming
Re: Dolmar 7300
« Reply #3 on: April 08, 2020, 10:15:18 pm »
I do not believe I have ever seen a key shear on a chainsaw before.    That thing must have come to a stop pretty fast so that the momentum of the fly wheel sheared the key. 
PP 505, 475, 445.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4123
  • Karma: 171
  • OHIO REDNECK
Re: Dolmar 7300
« Reply #4 on: April 09, 2020, 08:07:32 am »
Saving info. Fly side crank.  He said he cut  m8x1.25 threads before reinstalling  and then shearing key.
 I think it was more of both surfaces wasnt cleaned good and fly not tightened good. Just my WAG

He also had used red loctite. Thanks goodness it didnt hold on nut.

Pic of threads before die used. They looked good when I seen them now. But was leery to tighten down like I normally do.





REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
1174 Views
Last post March 10, 2012, 07:00:24 am
by MCW
0 Replies
428 Views
Last post February 04, 2013, 08:22:02 am
by Cut4fun
3 Replies
261 Views
Last post April 13, 2013, 02:21:07 pm
by 660magnum
17 Replies
574 Views
Last post January 26, 2014, 09:59:09 am
by Cut4fun .
6 Replies
952 Views
Last post June 30, 2017, 05:39:15 pm
by Philbert
31 Replies
779 Views
Last post March 04, 2014, 05:20:16 pm
by 660magnum
26 Replies
582 Views
Last post April 02, 2014, 09:03:00 pm
by Cut4fun .
59 Replies
519 Views
Last post December 03, 2014, 07:51:38 pm
by 660magnum
3 Replies
431 Views
Last post January 03, 2016, 03:19:17 pm
by Eccentric
0 Replies
422 Views
Last post May 25, 2018, 09:23:42 am
by Cut4fun .