Author Topic: Dolmar 9000  (Read 2030 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Dolmar 9000
« on: October 24, 2017, 10:16:17 am »
Looking for a Dolmar 9000 coil anyone?  Trying to help someone find one.


Is this the right part number?  024143100    if so I may have found a new one.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #1 on: October 24, 2017, 10:31:32 am »
Is this right?

Ignition coil.  Part number 024 143 051, 038 114 109, 038 114 270, 038114109
 
  Fits Makita Dolmar 9000i, 9010i, PS9000i, PS9010i, PS-9000, PS-9010, 9000, 9010 and others


pretty sure this is what he needs Prufrex ignition coil and flywheel set. 024 141 200, 024141200, 024 143 020, 024143020  without the flywheel
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #2 on: October 24, 2017, 04:47:16 pm »
Saving the response from Nate on the CR group to here so not to get lost.

Nathaniel Vansickle
 024142020 is correct # for 9000 but they arent available. best thing to do is upgrade to the 9010 flywheel/coil combo....better setup and a few extra rpm's IIRC. 957143010 is the number for the the 9010 combo. $186


Nathaniel Vansickle 024143051 is the 9010 coil and will not work with the 9000 flywheel
REDNECK Saw Repair Getter Done

Online mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Dolmar 9000
« Reply #3 on: October 24, 2017, 04:48:40 pm »
Yeah the 9000 is limited way low. I sold the last 9000 I got just because of that
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #4 on: October 24, 2017, 05:00:40 pm »
I found a new 9000 coil but was 129 and 8 shipping.  Told him better off doing the fly and coil swap.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Dolmar 9000
« Reply #5 on: October 24, 2017, 07:11:31 pm »
quick glance thru my notebook and the 9000 coil is limited around 11500, 9010 is 13000 or so.


I dont have allot of info on the 9000/9010 saws since they were mostly gone before i became a dealer, scott or steve would be better source of info.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #6 on: October 26, 2017, 09:33:43 am »
dolmar 9000 with bad coil

REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #7 on: October 27, 2017, 08:54:58 pm »
Info from Scott

Dolmar 134

OK the Dolmar PS9000 was originally going to be named a 134 as introduced on the DEC 1990 front cover of "Chain Saw Age" a wee bit of trivia for ya.. When we first got the PS9000's they were a bit soggy in weight from what we were told they would be. That being said they ran OK but were governed through the coil at way to low of RPM. Then they came out with a unlimited coil for them and if everything was in tune they were better. But they ate quite a few coils and also I experienced quite a few seizures as well. The saw with the unlimited coil was a tad temper-mental everything had to be in tune for it to live and still today some still do.

Then Came the redesigned PS9010 and it had a different Flywheel, Coil, and a Tilloston carb instead of that damn Bing carb. Then the saw became reliable and it makes a great 28" - 48" saw if your only planning on a 20" or a 24" I would rather use the lighter PS7900. Both the PS7900 and the PS9010 turn 13,500 RPM but the hp and torque go up with the PS9010 from the extra displacement. The PS9000 can and should be upgraded to the PS9010 flywheel and coil as far as the carb change its not necessary but I prefer the Tilloston.

There has been many a rumor of a replacement for the PS9010 in the near future its been named the PS9900 I would love to see this but I'm not hearing anything good from the rumor mill as far as a ETA

Its my belief that the Bing carb could not keep up with the extra RPM's of the unlimited coil.

updated 9010 kit coil and flywheel 957143010
tilloston carb HS294a 024150010
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4119
  • Karma: 171
  • OHIO REDNECK
Re: Dolmar 9000
« Reply #8 on: October 28, 2017, 08:22:06 am »
Dolmar 9000 muffler. Need a close up pic from the front if anyone has one.
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 9000
« Reply #9 on: October 28, 2017, 12:29:58 pm »
Dolmar 9000 muffler. Need a close up pic from the front if anyone has one.

JJ posted this one.

So factory has those 3 welds? top and both sides. Was looking at one today and was wondering about it.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
718 Views
Last post March 24, 2012, 11:18:52 am
by farmboy
12 Replies
1066 Views
Last post October 14, 2012, 06:43:27 am
by man of stihl
2 Replies
1014 Views
Last post July 24, 2012, 02:02:06 pm
by Cut4fun
Dolmar 112

Started by 3000 FPS « 1 2 3 4 » Dolmar Makita

31 Replies
1338 Views
Last post April 16, 2015, 10:41:34 am
by 3000 FPS
3 Replies
442 Views
Last post June 19, 2014, 04:40:38 pm
by dutchsawdoctor
1 Replies
143 Views
Last post September 10, 2014, 01:29:01 pm
by aclarke
20 Replies
418 Views
Last post October 24, 2014, 06:41:20 pm
by Windy_Acres
3 Replies
185 Views
Last post January 13, 2015, 12:03:22 am
by dannyupsolate
8 Replies
511 Views
Last post April 12, 2016, 06:56:28 pm
by Cut4fun .
1 Replies
631 Views
Last post February 16, 2019, 09:11:02 am
by Cut4fun .