« previous next »
Pages: [1]   Go Down

Author Topic: opinions on piston rings.....dolmar 143  (Read 687 times)

0 Members and 1 Guest are viewing this topic.

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
opinions on piston rings.....dolmar 143
« on: March 14, 2014, 06:38:51 am »
I have a 143 that I think I can salvage with a little smoothing on the piston and a new set of rings... i haven't done much searching but can any set of 55mm rings as long as they are the same thickness be used in a chainsaw?  It seems that many 2stroke dirt bikes used 55mm rings and from what little searching I've done are cheaper and easier to find. ...opinions?
Logged
Trapped in time, surrounded by evil, low on gas

Share on Facebook Share on Twitter

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23511
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: opinions on piston rings.....dolmar 143
« Reply #1 on: March 14, 2014, 06:48:25 am »
I used husky 394 rings in my one of my dolmar 166.  So I would say yes.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23511
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: opinions on piston rings.....dolmar 143
« Reply #2 on: March 14, 2014, 06:52:12 am »
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: opinions on piston rings.....dolmar 143
« Reply #3 on: March 14, 2014, 09:25:19 am »
The only problem you might encounter is how the ring end gap is finished e.g. for off-set or centered locating pin. There were at one time rings that when compressed had no end gap at all, they completely wrapped around the locating pin.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: opinions on piston rings.....dolmar 143
« Reply #4 on: March 14, 2014, 01:18:11 pm »
Thanks for the info... i will measure the thickness when I get back out to the shop.... i saw those Cut but I have purchased from this seller before and the product was good but shipping from Athens took forever! Just thought I might find something in that price range but a little closer. ....i will investigate more once I'm back on a normal computer. ....A little easier than the phone. ...
Logged
Trapped in time, surrounded by evil, low on gas

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: opinions on piston rings.....dolmar 143
« Reply #5 on: March 14, 2014, 01:47:46 pm »
Just saving info.

Dolmar 133 143 IPL http://www.jurec.hr/pdf/dolmar-133s-143.pdf

ring 031132040  is 55mm 1.5mm

ring 031132050 is 55mm  1.2mm      I am betting you can use the husky 390 ring if your 143 has this one.

Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: opinions on piston rings.....dolmar 143
« Reply #6 on: March 14, 2014, 01:51:50 pm »
IF you get lucky and 1.2mm  thick  $6 apiece http://northwoodsaw.com/store/index.php?l=product_detail&p=1273

Replacement Piston Ring for Husqvarna 390 and other equipment, High Quality European Made by Caber. The size is 55mm in diameter by 1.2mm thick. The price listed is per ring.
Logged

Offline chainsman1

  • 5 cube
  • ***
  • Posts: 105
  • Karma: 8
Re: opinions on piston rings.....dolmar 143
« Reply #7 on: March 14, 2014, 08:39:25 pm »
If you are using a dirt bike ring,make sure it is not chrome coated, because the 143 cylinder is chromed too. You cant use chrome on chrome.
Logged

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: opinions on piston rings.....dolmar 143
« Reply #8 on: March 17, 2014, 09:07:10 am »
The 1.2mm will work so I will order them today.  Thanks for all the help & input.... i will post once I get it running. ..
Logged
Trapped in time, surrounded by evil, low on gas
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
72 Replies
9386 Views 		Last post August 30, 2015, 01:21:23 pm
by Cut4fun .
2 Replies
1431 Views 		Last post December 10, 2011, 10:38:37 pm
by 660magnum
30 Replies
2732 Views 		Last post October 09, 2015, 06:45:45 pm
by Cut4fun .
7 Replies
1285 Views 		Last post October 20, 2021, 01:25:56 pm
by 3000 FPS
60 Replies
4670 Views 		Last post July 05, 2013, 01:18:47 pm
by 660magnum
40 Replies
1866 Views 		Last post December 20, 2013, 01:00:22 pm
by Spike60
3 Replies
875 Views 		Last post November 06, 2013, 05:35:04 pm
by Captain Howdy
4 Replies
347 Views 		Last post February 02, 2014, 07:51:15 am
by fossil
1 Replies
453 Views 		Last post March 09, 2014, 03:41:36 pm
by stihls066
2 Replies
609 Views 		Last post June 19, 2014, 03:32:20 pm
by farmboy