Author Topic: Pulled my 36" bar with my 7300 yesterday  (Read 580 times)

0 Members and 0 Guests are viewing this topic.

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Pulled my 36" bar with my 7300 yesterday
« on: March 25, 2014, 06:41:02 pm »
I dropped a cotton wood yesterday with my 7300 and 36" bar.My chain was an oregon full chisel. It didnt take all the bar but pert near. The only problem I noticed is while cutting the trunk up the bar was getting gummed up 3/4 the way thru my cut. The saw held its own power wise. I used a 8 tooth sprocket. I tried to switch to a 7 tooth but my chains are too long.The oiler seemed to do the job ok. The bar and sprocket didn't seem to get hot. A friend of mine took a video its only on fb tho.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #1 on: March 25, 2014, 07:18:53 pm »
I used a stock 7900 with 36" at a gtg in a big cottonwood. Pulled it fine and pretty much buried.  Wouldnt have wanted to try it in hardwood though.
 Wasnt mine to check the oiling etc so no clue on that.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #2 on: March 25, 2014, 07:26:20 pm »
owner of saw and 36"




me with above saw back in 2007 in the cut.

REDNECK Saw Repair Getter Done

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #3 on: March 25, 2014, 07:44:09 pm »
Those are cool pics!I like the grapple on the front end loader too. The cottonwood I cut was jus a few mins away from you on 598. A friend of mine has property jus outside of tiro there. Tomorrow I'm picking up a homemade log arch and we are gonna take down a black walnut. We are using the arch to get the log out of another friends yard. The lumber will prob get used for furniture and to turn a few duck calls on the lathe. I'll throw some pics up if I can.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #4 on: March 25, 2014, 07:46:11 pm »
PM me the username on FB video and I will put link here for use to see.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #5 on: March 25, 2014, 08:11:21 pm »
This may not work. Video says this.  Some people may not be able to see this attachment because of its privacy settings.

https://www.facebook.com/photo.php?v=681486558556318&set=vb.100000849398356&type=2&theater
REDNECK Saw Repair Getter Done

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #6 on: March 25, 2014, 08:26:48 pm »
it worked for me but obviously i'm included in the privacy setting. i tried saving the video on my phone and my computer to no avail.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #7 on: March 25, 2014, 08:28:06 pm »
worked for me too from link here
 
REDNECK Saw Repair Getter Done

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #8 on: March 25, 2014, 08:32:55 pm »
i jus changed it to public on mine. tomorrow I'll have him film me with my iphone takin down the walnut. I can save it to my computer that way or upload it to my photobucket.

Offline Ducksnuff870

  • 6 cube
  • ****
  • Posts: 174
  • Karma: 16
Re: Pulled my 36" bar with my 7300 yesterday
« Reply #9 on: March 26, 2014, 08:51:15 pm »

 

Related Topics

  Subject / Started by Replies Last post
21 Replies
829 Views
Last post October 10, 2012, 10:50:38 am
by yldflight
1 Replies
479 Views
Last post May 25, 2012, 05:43:04 pm
by Cut4fun .
5 Replies
388 Views
Last post November 07, 2012, 02:29:23 pm
by H 2 H
0 Replies
122 Views
Last post March 07, 2013, 12:04:09 pm
by Magnus
25 Replies
1092 Views
Last post October 10, 2013, 08:49:33 pm
by Al Smith
8 Replies
321 Views
Last post October 03, 2013, 09:25:44 pm
by JOE.G
57 Replies
622 Views
Last post January 01, 2014, 07:56:48 pm
by Cut4fun .
2 Replies
288 Views
Last post February 22, 2014, 05:47:21 pm
by Gregg MacPherson
2 Replies
174 Views
Last post March 09, 2016, 06:38:32 am
by Moparmyway
10 Replies
462 Views
Last post June 06, 2017, 11:35:56 am
by frypanjack