Author Topic: Sachs Dolmar 166  (Read 4255 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Sachs Dolmar 166
« on: March 13, 2011, 11:28:25 am »
Marcel Vincent MVP ported 166 on muffler and 11T.

http://www.youtube.com/watch?v=XiVeELUkr1c
REDNECK Saw Repair

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #1 on: March 13, 2011, 11:38:07 am »
Carb set real rich on wot tune and showing how they clear up in the cut.

http://www.youtube.com/watch?v=YqXOHsQE3Wk
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #2 on: March 13, 2011, 11:40:34 am »
Same saw on tuned pipe after a fresh rebuild after hanging a ring early in the year.

http://www.youtube.com/watch?v=cTplf5etMes
REDNECK Saw Repair

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Sachs Dolmar 166
« Reply #3 on: March 13, 2011, 01:11:27 pm »
At the start of the video it sounds like you are starting and blipping the throttle on an old dirt bike.
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #4 on: March 13, 2011, 07:48:15 pm »
They do sound different even at idle.

http://www.youtube.com/watch?v=VjAfFqlKu5c
REDNECK Saw Repair

Offline TORX

  • 5 cube
  • ***
  • Posts: 91
  • Karma: 1
Re: Sachs Dolmar 166
« Reply #5 on: March 16, 2011, 08:08:49 pm »
in your opinion. which of the big three is the strongest? [084,166, 3120]

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #6 on: March 16, 2011, 08:59:43 pm »
All stock and no limiters of any kind (coil or carbs). I would take a 084.

 I ripped with the 084 and 3120. Never ripped cut with the 166. But IMO it wasnt close to the 3120 and 084 in the cuts.

Now you start putting 72" 84" bars and redwood trees that long stroke might come in to play on the 166.
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #7 on: September 17, 2011, 11:31:39 am »
Here is the video I was telling someone about  ;).  Sound of a 166 idling.

 Leeha has a video of 12-14 of them idling together. Sounds like a top fuel car. IMO    ;D

http://www.youtube.com/watch?v=VjAfFqlKu5c&feature
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Sachs Dolmar 166
« Reply #8 on: September 17, 2011, 04:25:15 pm »
To the guy asking about replacement dolmar 166 piston.

Lee H. leeha ( I have email and # if needed and he ok's) had these Dolmar 166 Wiseco pistons made up for stock replacement and they were lighter then stock with wider shirts and 1mm rings. I had bought 2 from him for around $155 apiece   shipped


REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Sachs Dolmar 166
« Reply #9 on: September 17, 2011, 04:32:26 pm »
2 more pics of actual 166 piston I had in hand.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1347 Views
Last post January 02, 2012, 07:10:50 pm
by rms61moparman
21 Replies
1761 Views
Last post May 31, 2014, 10:52:19 am
by man of stihl
8 Replies
408 Views
Last post August 26, 2014, 12:14:10 am
by stihls066
48 Replies
2860 Views
Last post February 12, 2020, 08:56:51 pm
by Cut4fun .
18 Replies
856 Views
Last post February 14, 2015, 08:40:38 am
by man of stihl
12 Replies
1893 Views
Last post June 25, 2017, 10:13:52 am
by Cut4fun .
2 Replies
508 Views
Last post January 27, 2017, 06:51:49 pm
by 166
1 Replies
428 Views
Last post January 28, 2017, 03:23:23 pm
by 660magnum
3 Replies
413 Views
Last post February 12, 2017, 09:33:36 am
by stretch5881
23 Replies
774 Views
Last post October 17, 2019, 07:49:29 pm
by pete