Chainsaw Repair

I was going to pay $50.00 but the PO couldn't find the clutch cover which is also the chain tensioner.  I've been thinking that I might be able to run it with an Intenze bar as the chain adj is in the bar itself.  I know not very safe to do.  I hogged out the cat, opened up the exhaust exit on the muffler and it runs sweetly.  Up here the clutch cover is $75 plus tax and shipping OUch! Still nice little saw for $100.  I'm hoping to find one off a burned up saw.

So I think I've solved the problem affordably.  I bought a clutch cover off ebay which doesn't have all the bits that are used for chain tensioning so it was cheaper than the complete one.  With this I'll use an Intenz bar which has the tensioning in the bar.  This way should save me about $45.00 which is a lot for a used saw.  The saw itself has seen very little work and after I hogged the cat out and pulled the carb limiters runs very sweetly.  One just has to remember that it is only 30cc.

It's oiling well now.  No sign of leakage out of the bottom as other have reported, so far.  Waiting to win an Intenz bar off ebay.

Everything now sorted and it's a sweet little saw.  Starts real easy, idles nicely, revs out.  Just have to remember that it's only 30cc