Author Topic: cs-500P  (Read 828 times)

0 Members and 0 Guests are viewing this topic.

Offline mweba

  • Piped Saw
  • *****
  • Posts: 391
  • Karma: 54
Re: cs-500P
« on: November 04, 2012, 10:40:09 am »
Stock times :11  :10  :09  ::10

MM times  :10  :09  :08  :08

Editing all the vids together.

Under the stock deflector is a tube that pulls out with out cutting.  Remove the tube and open up the face of the deflector.

Untitled by mweba1, on Flickr

I like the sound of a dual port so I added one.

Untitled by mweba1, on Flickr

Also the gasket does not match the exhaust port, it will need to be trimmed.

Untitled by mweba1, on Flickr

Looks like a decent gain in cut times but the big difference is in throttle response.  The saw revs much sharper.


Related Topics

  Subject / Started by Replies Last post
0 Replies
Last post November 07, 2012, 08:50:19 am
by mweba