Chainsaw Repair

Echo was already scored and pulling 140psi when it was ran this day. We didnt know that at the time.

The test wood was right in the echo 590 strong point. Bigger wood.   Little 357xp 56.5cc had a heck of a cut when I ran it. I never bogged it during the cut like I was most times.  Eric Nicol was making the fastest cuts 99% of the time.

 The ash was 16" wide and started at 14" tall and ended up 16" tall by 16" wide. So is what it is. Wood got bigger as we went so times would get slower. I told Eric this is why I use cants to test with back when I cared about such. In the end I said they all cut wood and and the wood never complains if it takes a few seconds longer in the cuts. The OE m-tronic 362 impressed me the most. But no way would I ever pay a new asking price for one.

Eric Nicol  thank you so much for the nice sized testing wood and the big bar testing wood you left for me too. The German beer is just how I remember them = very good. Wife tried it and said yep thats just how she remembered it out of those big glasses when she was there.

(((((((Eric Nicol posting Results are in on the 60cc saw comparison the cuts was in 14” ash but ended up being 16” at the finish so some of the times could’ve should’ve been a little quicker but it is what it is starting with fastest time Stihl 362 - 14.50 Husqvarna 357xp - 16.22 Echo cs590 - 16.37 my Poulan 380 - 18.19 Kevin’s 380 - 21.50 huztl 036 - 22.19 Dolmar 120 - 33.39 but the Dolmar had some issues so I’m sure it would have done better..overall a great day with good people))))))))