Author Topic: echo 5000  (Read 2065 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 532
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: echo 5000
« Reply #40 on: December 28, 2015, 07:26:58 pm »
46x31 is way to big  51.54

only numbers that come up to the 49.3 are those I showed earlier above.

The CLS 5000 brush saw has same cc with those bore and stroke too.
REDNECK Saw Repair Getter Done

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: echo 5000
« Reply #41 on: December 29, 2015, 05:23:47 am »
yep, 46mm x 31mm is too big, but after checking some other models saws i found that 45mm x 31mm is showing 49.3cc, so maybe that's were the 5000 is, i'm going to make some calls today to try and confirm........i don't see how the 4500/4600 and the 5000 can share the same crank without them having a 31mm stroke.....

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 532
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: echo 5000
« Reply #42 on: December 29, 2015, 08:47:17 am »
Didnt know they shared same crank.

Bingo that has to be it.  45x31 = 49.3cc too. I thought I had ran those numbers, but must have slipped.


REDNECK Saw Repair Getter Done

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: echo 5000
« Reply #43 on: December 29, 2015, 02:28:44 pm »
got through to general power today, confirmed, 45mm x 31mm......yep, i posted about the crank earlier....... ;D

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 532
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: echo 5000
« Reply #44 on: December 29, 2015, 02:29:54 pm »
Good to know thanks for the leg work.
REDNECK Saw Repair Getter Done

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: echo 5000
« Reply #45 on: December 29, 2015, 02:58:20 pm »
i've got a nearly complete 5000 in the works right now that will most likely be coming to my address, i'll be able to confirm if the cylinder will fit in the 4600 cases without mods.... ;)

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: echo 5000
« Reply #46 on: December 29, 2015, 03:05:29 pm »
here's the other 4600 i picked up from Andy......all cleaned up, base gasket gone......waiting on ordered handle and hand gaurd.....this one also cleaned up real good.... ;D

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 532
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: echo 5000
« Reply #47 on: December 29, 2015, 03:16:37 pm »
Are the 4500 cylinder same as 4600?  The 4000 goes on the 4500 I THINK? Dont recall now.   Thats why I had wondered if it was as simple as putting a 5000 on 4500.

I have a 4000 cylinder too with no piston.
REDNECK Saw Repair Getter Done

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: echo 5000
« Reply #48 on: December 29, 2015, 03:36:13 pm »
yep, 4500 and 4600 are the same, i still don't know if putting a 5000 cylinder on a 4500/4600 is easy, still need to find out if the cases will accept it........i still have yet to even see a 4000 and i think there was a 4100 as well, seams like another where the bore and stroke will need to be checked.... ???

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 532
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: echo 5000
« Reply #49 on: December 29, 2015, 05:49:30 pm »
4000 40mm x 31mm
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Partner 5000 plus

Started by Cut4fun « 1 2 ... 7 8 » Partner

74 Replies
6691 Views
Last post August 09, 2019, 10:01:21 am
by Cut4fun .
3 Replies
497 Views
Last post September 05, 2011, 08:01:40 pm
by Cut4fun .
5000 plus

Started by CGK-60 Partner

2 Replies
492 Views
Last post November 18, 2011, 08:00:01 pm
by CGK-60
7 Replies
1059 Views
Last post January 05, 2012, 06:38:47 am
by Al Smith
6 Replies
295 Views
Last post January 24, 2012, 07:04:09 pm
by Cut4fun .
8 Replies
368 Views
Last post March 12, 2012, 05:54:35 pm
by man of stihl
Dolmar 5000

Started by dolmarfan « 1 2 ... 12 13 » Dolmar Makita

124 Replies
5759 Views
Last post October 14, 2013, 08:32:41 am
by farmboy
10 Replies
1322 Views
Last post August 27, 2012, 01:13:55 pm
by CASE5854x4
500/5000 gaskets

Started by aclarke « 1 2 » Partner

11 Replies
525 Views
Last post November 02, 2015, 08:02:13 am
by Cut4fun .
11 Replies
650 Views
Last post January 20, 2016, 03:32:33 pm
by jeff.lary