Author Topic: Echo 702  (Read 1977 times)

0 Members and 0 Guests are viewing this topic.

Offline Bitburger

  • 4 cube
  • **
  • Posts: 39
  • Karma: 7
  • Location: Menlo Park, CA
Re: Echo 702
« Reply #10 on: April 09, 2013, 05:23:04 pm »
this is a very nice saw you got there !!!



Offline echo nut

  • 3 cube
  • *
  • Posts: 8
  • Karma: 2
  • Location: Salem Ohio
Re: Echo 702
« Reply #11 on: August 28, 2014, 07:54:38 pm »
That 702 is more than 30 years old :) I loved them when my dad had a room stocked full of them. Bob
Bob Wright the Echo Nut
CS-301, CS-315, CS-300, CS302, CS302S, CS-3900, CS452, CS-60S, CS-750, CS-802, CS-1001VL, CS-60S cutoff saw.

Offline mowertech

  • 5 cube
  • ***
  • Posts: 83
  • Karma: 3
    • Online  Store  Site  Obsolete  Homelite  Super Store
Re: Echo 702
« Reply #12 on: September 03, 2014, 02:27:19 pm »
echo nut  could you  believe  parts  are  still  available for this  model   from   few  sources 
For your  Obsolete Homelite  , McCulloch , Echo,
Poulan  Parts  visit us at  http://www.smallenginechainsawparts.com

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21166
  • Karma: 474
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo 702
« Reply #13 on: July 10, 2015, 02:50:24 pm »
Whats the longest bar that one could use comfortably on these 71cc saws? 

Guy before me ran 24" and 8T and yes it does pull 8T fine, I was  :o. I tried 7T and shorter bar before and went back to 8T.
Thinking 7T and longer set up now with full skip.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21166
  • Karma: 474
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo 702
« Reply #14 on: July 10, 2015, 02:52:54 pm »
24" I got from John   8)






REDNECK Saw Repair Getter Done

Online 67L36Driver

  • 5 cube
  • ***
  • Posts: 111
  • Karma: 23
Re: Echo 702
« Reply #15 on: July 10, 2015, 03:50:45 pm »
I'd love to run this one.  But not all the parts were in the basket.

Missing oil pump guts, muffler cover and decomp bits.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21166
  • Karma: 474
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo 702
« Reply #16 on: July 10, 2015, 05:48:57 pm »
I'd love to run this one.  But not all the parts were in the basket.

Missing oil pump guts, muffler cover and decomp bits.


JD 80 ?
REDNECK Saw Repair Getter Done

Online 67L36Driver

  • 5 cube
  • ***
  • Posts: 111
  • Karma: 23
Re: Echo 702
« Reply #17 on: July 10, 2015, 06:27:31 pm »

I'd love to run this one.  But not all the parts were in the basket.

Missing oil pump guts, muffler cover and decomp bits.


JD 80 ?
Yup,  AKA 750EVL

Offline Hoggwood

  • 4 cube
  • **
  • Posts: 64
  • Karma: 17
Re: Echo 702
« Reply #18 on: July 13, 2015, 02:18:05 pm »
Whats the longest bar that one could use comfortably on these 71cc saws? 

Guy before me ran 24" and 8T and yes it does pull 8T fine, I was  :o. I tried 7T and shorter bar before and went back to 8T.
Thinking 7T and longer set up now with full skip.

I've wondered that as well.  I know the oil pumps are generous on these saws.  It is a matter of torque after that I guess.  In fact the same pumps were used on many of their saws all the way up to 1001.  Specs peg that max output of that pump at 18cc/min at 6500 RPM. Plus you've got manual.  28" or more with skip, I bet.  1001 has the same delivery rate specs as the 702.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21166
  • Karma: 474
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo 702
« Reply #19 on: July 13, 2015, 02:26:53 pm »
Whats the longest bar that one could use comfortably on these 71cc saws? 

Guy before me ran 24" and 8T and yes it does pull 8T fine, I was  :o. I tried 7T and shorter bar before and went back to 8T.
Thinking 7T and longer set up now with full skip.

I've wondered that as well.  I know the oil pumps are generous on these saws.  It is a matter of torque after that I guess.  In fact the same pumps were used on many of their saws all the way up to 1001.  Specs peg that max output of that pump at 18cc/min at 6500 RPM. Plus you've got manual.  28" or more with skip, I bet.  1001 has the same delivery rate specs as the 702.

Great info. I did not know this and thanks for sharing.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
308 Views
Last post September 28, 2013, 03:47:02 pm
by Cut4fun .
3 Replies
318 Views
Last post November 15, 2014, 05:53:48 pm
by Eccentric
13 Replies
511 Views
Last post June 17, 2015, 01:33:44 pm
by 67L36Driver
5 Replies
654 Views
Last post March 10, 2014, 09:48:26 pm
by 3000 FPS
Echo CS-8000

Started by KilliansRedLeo « 1 2 » Echo

10 Replies
501 Views
Last post March 15, 2014, 02:03:04 pm
by Cut4fun .
8 Replies
1980 Views
Last post July 29, 2017, 10:12:16 am
by Cut4fun .
8 Replies
6928 Views
Last post April 29, 2016, 08:01:58 pm
by chy_farm
Echo cs4600

Started by leec Echo

2 Replies
338 Views
Last post April 20, 2014, 09:09:16 pm
by Cut4fun .
Echo CS346-345

Started by leec Echo

4 Replies
375 Views
Last post June 05, 2014, 08:22:37 pm
by leec
9 Replies
513 Views
Last post November 04, 2017, 08:43:38 pm
by Jaymo