Author Topic: Echo bar adapters 12mm to 8mm D176  (Read 1265 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Echo bar adapters 12mm to 8mm D176
« on: July 15, 2015, 02:30:38 pm »
Just getting the word spread here in echo board.

Echo bar adapters 12mm to 8mm D176  to run the stihl bars on your D176 mount Echo.

This member will be doing the ordering  Nathaniel Vansickle . @Nathaniel Vansickle  http://performanceoutdoorequipment.com/

Cannon is now making adapters for P4 (8mm) to S1 (12mm) allowing Echo saws to accept a Stihl mount bar. They should be released for sale in 3 weeks or so and my plan is to place an order first of next week. So for anyone wanting Cannon bars or adapters let me know what you want and I will add it to the order.

Bar adapters

S1 (12mm) to P4 (8mm) $6.76

also

S1 (12mm) to H1 (9mm) $6.76


Thread in the where to buy online from dealers etc. http://chainsawrepair.createaforum.com/used-chainsaw-parts-online/performance-outdoor-equipment-dolmar-parts/msg59602/#new

REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #1 on: July 15, 2015, 03:10:46 pm »
Thanks. I debated where to post that and decided the dealers thread was probably the best.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #2 on: August 07, 2015, 11:49:05 am »
Echo adapters dont fit the 590/600/620. outside of studs on the 620 is 1.885 and the adapters have a spacing of 1.725. So now the question is what all will these Echo adapters fit?


AS 002 by nathaniel vansickle, on Flickr

AS 001 by nathaniel vansickle, on Flickr
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #3 on: August 07, 2015, 12:28:15 pm »
Somebody fubarred  :o
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #4 on: August 07, 2015, 01:13:37 pm »
Somebody fubarred  :o

part of that was me....i dont have a cs-800 to check spacing on. D176 mount to S1...i assumed all the echo saws had the same spacing on the studs but never physically measured them. just eyeballed it.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #5 on: August 07, 2015, 01:24:35 pm »
Somebody fubarred  :o

part of that was me....i dont have a cs-800 to check spacing on. D176 mount to S1...i assumed all the echo saws had the same spacing on the studs but never physically measured them. just eyeballed it.

I just sold my 800V.  You have a 6700 670 680 to try on?
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #6 on: August 07, 2015, 02:21:43 pm »
biggest echo saw i stock is the 620PW.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #7 on: August 07, 2015, 05:56:26 pm »
I need to go to barn as guy picking up MS440, if I remember I will pull bar off 6700 and measure. If not I will later or someone else please measure for us.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #8 on: August 07, 2015, 06:41:41 pm »
I forgot  :-[. We got to telling ole drinking stories from many many years ago.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Echo bar adapters 12mm to 8mm D176
« Reply #9 on: August 08, 2015, 12:59:08 am »
I bet those are patterned off older D176 mount saws.  I will measure my Poulan, Echo, Homelite, and Lombard D176 mount saws this weekend.  Kevin if I don't post up here by Sunday evening please give me a ring or a text.  My memory isn't the best....
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
Echo 280

Started by Cut4fun . « 1 2 » Echo

10 Replies
1101 Views
Last post May 21, 2013, 03:48:18 pm
by Cut4fun .
2 Replies
565 Views
Last post February 06, 2012, 08:39:26 pm
by DB_43725
Echo 290

Started by Cut4fun . Echo

1 Replies
274 Views
Last post September 19, 2013, 05:24:50 pm
by sharkey
2 Replies
545 Views
Last post July 13, 2015, 12:45:42 am
by Eccentric
7 Replies
289 Views
Last post October 06, 2014, 09:32:58 am
by rusted bolts
Echo 340 T

Started by Cut4fun . « 1 2 3 » Echo

27 Replies
1202 Views
Last post January 29, 2016, 09:06:32 pm
by Cut4fun .
6 Replies
161 Views
Last post February 08, 2015, 05:51:03 pm
by Eccentric
22 Replies
503 Views
Last post August 24, 2015, 08:50:24 pm
by Eccentric
6 Replies
420 Views
Last post July 31, 2015, 12:26:53 pm
by Cut4fun .
15 Replies
341 Views
Last post April 12, 2016, 04:20:49 pm
by sharkey