Author Topic: Echo bar adapters 12mm to 8mm D176  (Read 1254 times)

0 Members and 0 Guests are viewing this topic.

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #20 on: August 17, 2015, 12:04:16 pm »
ok so i just got off the phone with cannon and these adapters were made to fit the smaller series of echo saws. Am i the only one that thinks this is dumb? i need this explained to me why we need to install a medium stihl mount bar on a 40-50cc echo saw? last i checked only the 590/600/620/670/800 were labeled as D176 mount? Am i having a blonde moment or what?
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #21 on: August 17, 2015, 12:26:33 pm »
Smaller echo's. That dont make since IMO.

My smaller echo 3900 uses A095 K095 .325. Other A041.  ??? 

Curve ball for sure.  I think they just fubarred.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #22 on: August 17, 2015, 02:50:44 pm »
 ??? is right. I double checked the catalog and D176 is 590 and up. below that is ko41 and such so i wasnt dreaming. Doesnt make sense to me either. guess i have a pile of adapter to throw in the scrap bin unless i can figure out something that they fit. i have a 400EVL i checked and the adapters dont fit it either. I will have to check the CS-400 when i get home. Sold all my echo saws off the shelf except the 620, 590, and 310. thinning the herd before fall order time so i cant check any of those. I did find that it will fit over the studs on the 5105 but they have the chain adjuster inbetween the studs so i cant put my 36" Stihl bar on the 5105 either.  >:(
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #23 on: August 17, 2015, 04:35:31 pm »
I'd be talking to their customer service folks about returning them. JMO  You ordered for D176 echo's.  They are not thats for sure.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #24 on: August 17, 2015, 06:37:56 pm »
Bill told me i could return them when i talked to them this morning but its just not worth the hassle.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #25 on: August 17, 2015, 06:54:20 pm »
Bill told me i could return them when i talked to them this morning but its just not worth the hassle.

Thats good that they offered. 

I was figuring you might have ordered 10-30 and that would add up.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #26 on: August 17, 2015, 07:34:07 pm »
try 40. I will put them on the website. they fit something so someone will need them at some point. I HOPE
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo bar adapters 12mm to 8mm D176
« Reply #27 on: August 17, 2015, 08:01:40 pm »
 :o :o :o
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #28 on: August 22, 2015, 03:59:37 pm »
how is this?
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 468
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo bar adapters 12mm to 8mm D176
« Reply #29 on: August 22, 2015, 04:02:14 pm »
Cannon adapters dont work so Homelite410 came through with some adapters based on his husky adapters that should prove pretty useful for a wide range of saws.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


 

Related Topics

  Subject / Started by Replies Last post
Echo 280

Started by Cut4fun . « 1 2 » Echo

10 Replies
1096 Views
Last post May 21, 2013, 03:48:18 pm
by Cut4fun .
2 Replies
565 Views
Last post February 06, 2012, 08:39:26 pm
by DB_43725
Echo 290

Started by Cut4fun . Echo

1 Replies
274 Views
Last post September 19, 2013, 05:24:50 pm
by sharkey
2 Replies
532 Views
Last post July 13, 2015, 12:45:42 am
by Eccentric
7 Replies
289 Views
Last post October 06, 2014, 09:32:58 am
by rusted bolts
Echo 340 T

Started by Cut4fun . « 1 2 3 » Echo

27 Replies
1199 Views
Last post January 29, 2016, 09:06:32 pm
by Cut4fun .
6 Replies
160 Views
Last post February 08, 2015, 05:51:03 pm
by Eccentric
22 Replies
493 Views
Last post August 24, 2015, 08:50:24 pm
by Eccentric
6 Replies
418 Views
Last post July 31, 2015, 12:26:53 pm
by Cut4fun .
15 Replies
338 Views
Last post April 12, 2016, 04:20:49 pm
by sharkey