Author Topic: Echo CS 1001 starting with one pull.  (Read 1421 times)

0 Members and 0 Guests are viewing this topic.

Offline echo nut

  • 3 cube
  • *
  • Posts: 8
  • Karma: 2
  • Location: Salem Ohio
Echo CS 1001 starting with one pull.
« on: October 04, 2011, 06:30:03 pm »
After a teardown to replace all the gas and oil lines. One pull without the decomp...Bob

http://www.youtube.com/watch?v=0wDHmbmKG3g
Bob Wright the Echo Nut
CS-301, CS-315, CS-300, CS302, CS302S, CS-3900, CS452, CS-60S, CS-750, CS-802, CS-1001VL, CS-60S cutoff saw.

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4087
  • Karma: 165
  • OHIO REDNECK
Re: Echo CS-1001 starting with one pull.
« Reply #1 on: October 04, 2011, 07:48:43 pm »
Is or was that the biggest cc echo sold in the states? Is there a bigger cc echo sold overseas?  What model was it if so, I think I remember something, but unclear anymore.  :'(

Echo 1001 IPL  http://www.echo-usa.com/getattachment/9c611e1a-c414-4806-9c5f-8cc4ff86801d/CS1001vl_010280.pdf
REDNECK Saw Repair

Offline echo nut

  • 3 cube
  • *
  • Posts: 8
  • Karma: 2
  • Location: Salem Ohio
Re: Echo CS-1001 starting with one pull.
« Reply #2 on: October 04, 2011, 08:11:07 pm »
The current 112cc CS-1201 isn't sold here but the Echo Carving Team uses a few of them. There was a 106cc but i don't know the number and my pictures are fuzzy. There also was a CS-1100 and that was over 100cc also...Bob
Bob Wright the Echo Nut
CS-301, CS-315, CS-300, CS302, CS302S, CS-3900, CS452, CS-60S, CS-750, CS-802, CS-1001VL, CS-60S cutoff saw.

Offline North West Farmer

  • 4 cube
  • **
  • Posts: 33
  • Karma: 3
Re: Echo CS-1001 starting with one pull.
« Reply #3 on: November 24, 2011, 11:32:12 pm »
A close friend of mine is an ECHO fan and has chainsaws of that brand in several sizes.  We did use one of his biggest saws to do some falling several years ago and it was a dang good saw, stood up very well with my Jonsered 910E.

He was in the Navy and purchased a lot of tools like chainsaws when overseas due to the great prices he was able to take advantage of.  After reading this post, I e-mailed him requesting information on his big saw that I believe he bought overseas in Japan.  If and when I hear back from him, if he has any information that sheds light on the topic of this thread I will pass it along to you.

Nick, North West Farmer

Offline echo nut

  • 3 cube
  • *
  • Posts: 8
  • Karma: 2
  • Location: Salem Ohio
Re: Echo CS-1001 starting with one pull.
« Reply #4 on: December 03, 2011, 08:23:31 pm »
Thanks Nick...
Bob Wright the Echo Nut
CS-301, CS-315, CS-300, CS302, CS302S, CS-3900, CS452, CS-60S, CS-750, CS-802, CS-1001VL, CS-60S cutoff saw.

Offline North West Farmer

  • 4 cube
  • **
  • Posts: 33
  • Karma: 3
Re: Echo CS-1001 starting with one pull.
« Reply #5 on: December 04, 2011, 05:03:51 am »
Echo Nut,

I checked with my friend regarding purchasing his larger ECHO chainsaw in Japan and he did not acquire it overseas.

The saw performed very well, but it is a smaller chainsaw than I expected.  It is a CS-750EVL, rated at 78.6cc.  No help regarding larger ECHO chainsaws in the 100cc plus area.

Nick, North West Farmer

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-1001 starting with one pull.
« Reply #6 on: September 18, 2013, 06:46:17 pm »
Bump for 1001
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS 1001 starting with one pull.
« Reply #7 on: January 05, 2014, 11:01:07 am »
Wondering if this is a echo 1001 that is for sale?    What is the going rate on a runner cutter? Just ideas. 
REDNECK Saw Repair Getter Done

Offline jacob j.

  • 4 cube
  • **
  • Posts: 50
  • Karma: 16
Re: Echo CS 1001 starting with one pull.
« Reply #8 on: January 05, 2014, 12:23:15 pm »
Wondering if this is a echo 1001 that is for sale?    What is the going rate on a runner cutter? Just ideas.

That's an Echo 900...

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS 1001 starting with one pull.
« Reply #9 on: January 05, 2014, 12:33:31 pm »
Wondering if this is a echo 1001 that is for sale?    What is the going rate on a runner cutter? Just ideas.

That's an Echo 900...

Thanks for the info JJ.  I didnt know how to tell the difference in a 900 or 1001. 

Was hoping it was 1001 though.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
14 Replies
504 Views
Last post October 30, 2013, 08:41:27 pm
by president
80 Replies
2584 Views
Last post February 13, 2014, 02:37:33 pm
by mastercraftka
10 Replies
457 Views
Last post February 04, 2014, 03:24:19 pm
by president
15 Replies
2987 Views
Last post February 28, 2017, 10:26:34 am
by Cmtrey
21 Replies
445 Views
Last post July 27, 2014, 06:12:27 pm
by JohnG28
0 Replies
96 Views
Last post June 20, 2015, 12:02:22 pm
by Cut4fun .
6 Replies
358 Views
Last post February 07, 2016, 12:49:11 pm
by Golvannon
16 Replies
1588 Views
Last post September 06, 2020, 09:55:48 pm
by Spike60
9 Replies
359 Views
Last post June 18, 2017, 08:25:10 pm
by Al Smith
13 Replies
407 Views
Last post October 13, 2017, 05:45:23 am
by mountainlake