Author Topic: Echo CS-2511T  (Read 1129 times)

0 Members and 2 Guests are viewing this topic.

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 469
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo CS-2511T
« Reply #20 on: December 05, 2017, 10:05:40 pm »
guy i sold one to thinks it is a little under powered but he is used to running snelling ported stihl top handles.


sending him a 12" 3/8 .043 bar and chain to see if that makes a difference since a 1/4" pitch drum isnt available
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22
Re: Echo CS-2511T
« Reply #21 on: December 07, 2017, 05:44:19 pm »
well it wont compete with that or a cs 355t... but for its weight i can be way more precise....use it right or left handed....i mean i used a cs 3000 for yeas and was happy.... i thinks this out cuts that at 30 cc but being i am now 50 its a pleasure to use....anything over 4 or six inch and i would either take my time or use my bigger cs 355t....or a 201 if i had one....on palm trees its great...other then the clutch area is so tight and the fibers clog it... but i blow the area out after every use.... i dont take it apart but i blow it clean from the front and the bottom....palms are bad for clogging stuff up.....my pole saw is 23/24? cc??  I think and it blows it away....i just bought a cs 310 and this lil saw feels like it out cuts it with the lil 12 inch bar and chain even with factory chain.....I think its a very good saw for light pruning....In my Opinion....So far so good..... time will tell how it lasts.....
Informative Informative x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20341
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #22 on: December 19, 2017, 09:41:53 am »
saving stubnail67 info.

I know folks read it here and the chainsaw repair fb group.

a lil more update love the saw but the airfilter not so much after some hard use it was pretty dirty no big deal.. but saw some super fine dust inside it seemed really really loose so alot of trial and error different o-rings grease i settled on an o-ring around the carb intake ring i will call it... and to me it seems tight next clean up will tell the story.....here are some pics....
it was a b-word to compress it but i think hope it works....if not back to the drawing board

pics



REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22
Re: Echo CS-2511T
« Reply #23 on: December 20, 2017, 09:55:45 pm »
thanks i was going to try to copy paste it in here ... but i have a hard time posting more then one pic... i had many more pics of what i feel did not work... i think/hope this will be a good fix i will update on both sites after i put in a nasty environment again...i have not even modded it in any way yet.... i think it needs the low tuned out a lil... i know it does just a tad...it warms up pretty fast.... i need to check the plug see what color she is also....other then the airfilter i am real happy with it....like i said i like it so much i may sell a few and buy a 2nd one...  although im not doing tree work like i used to.... I used to always have 2 of everything....
Useful Useful x 1 View List

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22
Re: Echo CS-2511T
« Reply #24 on: January 08, 2018, 03:46:07 pm »
new Gb bar and chain combo came in today....
Like Like x 2 View List

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22
Re: Echo CS-2511T
« Reply #25 on: January 08, 2018, 03:47:47 pm »
was only able to upload the one pic i must be doing something wrong....
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20341
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #26 on: January 08, 2018, 05:49:15 pm »
was only able to upload the one pic i must be doing something wrong....

Can post 8 at a time here. Just have to click add another right under the one you did = (more attachments).
Up to 8 per post.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20341
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #27 on: January 08, 2018, 05:50:43 pm »
Looks like the one I ran on the 3900 during garage take down.

REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 172
  • Karma: 22
Re: Echo CS-2511T
« Reply #29 on: February 09, 2018, 08:22:55 pm »
 oregon S45 chain i got today .... ya think it sounds lean on the video? its still breaking in a adjusted it rich... but from the other side of saw sounds a lil lean.... also let me know if this works... thanks

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
272 Views
Last post September 28, 2013, 03:47:02 pm
by Cut4fun .
Echo 340 T

Started by Cut4fun . « 1 2 3 » Echo

27 Replies
1067 Views
Last post January 29, 2016, 09:06:32 pm
by Cut4fun .
6 Replies
342 Views
Last post July 31, 2015, 12:26:53 pm
by Cut4fun .
echo cs-310

Started by Cut4fun . « 1 2 » Echo

11 Replies
539 Views
Last post March 24, 2016, 03:01:43 pm
by leec
4 Replies
403 Views
Last post May 03, 2018, 11:16:19 am
by Cut4fun .
7 Replies
458 Views
Last post January 24, 2016, 12:38:55 pm
by Maniacal Mark
0 Replies
119 Views
Last post February 01, 2016, 01:32:05 pm
by Cut4fun .
4 Replies
327 Views
Last post August 16, 2016, 08:28:49 pm
by Cut4fun .
7 Replies
367 Views
Last post August 06, 2016, 05:32:43 pm
by leec
1 Replies
95 Views
Last post October 21, 2016, 09:40:45 am
by dannyupsolate