Author Topic: Echo CS-2511T  (Read 990 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20116
  • Karma: 429
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #30 on: February 09, 2018, 09:21:34 pm »
All looked good. Thanks for sharing. 

You tease.  :P

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20116
  • Karma: 429
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #31 on: March 02, 2018, 08:27:44 am »
Mitch testing one out in ash

https://youtu.be/3KZPzrN8ZP0
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 469
  • Karma: 92
  • Location: Newcomerstown ,Ohio
Re: Echo CS-2511T
« Reply #32 on: March 02, 2018, 01:18:08 pm »
got a 1/4" clutch drum and ordering the 1/4" bar and chain on my next order. will see how it performs when equipped the same as a 150 stihl.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20116
  • Karma: 429
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Echo CS-2511T
« Reply #33 on: March 02, 2018, 02:42:46 pm »
got a 1/4" clutch drum and ordering the 1/4" bar and chain on my next order. will see how it performs when equipped the same as a 150 stihl.

I find the 1/4 micro stuff very easy to file with the 3.2mm file myself.   Is super smooth and the climbers like it for pruning. I had my doubts but like it now for my uses.   

I really really like PS PS3 though. But can live with this 1/4" micro
REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 170
  • Karma: 22
Re: Echo CS-2511T
« Reply #34 on: March 02, 2018, 10:00:27 pm »
My dealer wants to look at my saw ... he forwarded the pics to echo.... i dam sure am not going to pay him....saw is fine not my fault the air filter sucks in fines.....I dont leave  my saws with any one...they can check it out... I told the dude i was not looking for warranty issues....I have worked on my own stuff for 20 plus years now....I dont see how they will help me .... Im not Homer Simpson.... I mean its nice they care.... maybe echo wants to know???? ask mitch if his sucks in fines after a few hours of cutting.....thank you.

Offline mweba

  • Piped Saw
  • *****
  • Posts: 390
  • Karma: 53
Re: Echo CS-2511T
« Reply #35 on: March 03, 2018, 10:10:39 pm »
I'll try to reacquaint myself with embeding here.    Happy with the performance and build on this little guy so far.     I greased the base and have no leakage

Offline mweba

  • Piped Saw
  • *****
  • Posts: 390
  • Karma: 53

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 170
  • Karma: 22
Re: Echo CS-2511T
« Reply #37 on: March 03, 2018, 11:10:17 pm »
You just run a bead of white lithium grease around where the air filter mates to the carb?that was my first idea then i changed my mind went with an o-RING that made no difference at all...think i will try the grease again as i never gave it a go.. I changed my mind before trying it out.....hmmm Maybe Mitch is going to mod the muffler and let us have a peek inside....I cant even find out how much a spare muffler is.... i think you could dremal the tack welds and pop it apart... but i dont weld so not sure how ya would put it back together....my clutch are was so full of gunk after the last palm job... next time i will take some pics..... the cs 355t seem to shoot stuff out better... its pretty tight in the clutch cover area on the cs 2511t.....I look forward to more people using them and figuring out fixes to the problems....still have not made it to my dealer to take the saw to him... i checked my piston and its fine... guess echo wants him to check it out... as they said it was to much stuff inside the filter halves.... witch i agree....

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 170
  • Karma: 22
Re: Echo CS-2511T
« Reply #38 on: March 03, 2018, 11:14:49 pm »
got a 1/4" clutch drum and ordering the 1/4" bar and chain on my next order. will see how it performs when equipped the same as a 150 stihl.

nice video... im subscribed to mweba youtube thats mitch yes? if so i will watch for new videos

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1089
  • Karma: 127
  • Location: Manitoba Canada
Re: Echo CS-2511T
« Reply #39 on: March 03, 2018, 11:31:37 pm »
You can braze the muffler back together with a torch and silver solder wire.
Making a living with a saw since age 16.

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
271 Views
Last post September 28, 2013, 03:47:02 pm
by Cut4fun .
Echo 340 T

Started by Cut4fun . « 1 2 3 » Echo

27 Replies
1061 Views
Last post January 29, 2016, 09:06:32 pm
by Cut4fun .
6 Replies
339 Views
Last post July 31, 2015, 12:26:53 pm
by Cut4fun .
echo cs-310

Started by Cut4fun . « 1 2 » Echo

11 Replies
538 Views
Last post March 24, 2016, 03:01:43 pm
by leec
4 Replies
395 Views
Last post May 03, 2018, 11:16:19 am
by Cut4fun .
7 Replies
454 Views
Last post January 24, 2016, 12:38:55 pm
by Maniacal Mark
0 Replies
115 Views
Last post February 01, 2016, 01:32:05 pm
by Cut4fun .
4 Replies
326 Views
Last post August 16, 2016, 08:28:49 pm
by Cut4fun .
7 Replies
355 Views
Last post August 06, 2016, 05:32:43 pm
by leec
1 Replies
95 Views
Last post October 21, 2016, 09:40:45 am
by dannyupsolate