Author Topic: picked two more CS-440 (Read 1115 times)

Giles · « **Reply #20 on:** June 03, 2015, 10:31:40 pm »

I have had similar situations. Since I rebuild as a hobby for a little extra money, I have time to waite and search on ebay.
The last Echo CS520 took over a month to find at a good price.

Giles · « **Reply #21 on:** June 04, 2015, 12:40:29 pm »

I have had to use heat a few times. Usually use a small propane burner. I might add that I seldom tighten the clutch with tool. Just spin it tight and REMEMBER to engage chain brake before starting. Then rev about 1/3 throttle with brake released and engage brake or start cutting.

mountainlake · « **Reply #22 on:** June 06, 2015, 06:29:16 am »

Any luck getting that clutch off yet. Steve

leec · « **Reply #23 on:** June 09, 2015, 08:53:30 pm »

No not yet. I've tried heating with propane torch and when I really put pressure on it with a ratchet it feels like something is bending but springs back. Afraid to break the con rod and make the repair worse than it is.
Thanks,

Lee

leec · « **Reply #24 on:** September 08, 2015, 04:46:03 pm »

Quote from: leec on June 09, 2015, 08:53:30 pm

No not yet. I've tried heating with propane torch and when I really put pressure on it with a ratchet it feels like something is bending but springs back. Afraid to break the con rod and make the repair worse than it is.
Thanks,

Lee

Ok so took it to a dealer to pop the clutch. Got the P&C apart and my heart sank scoring! I was sold this saw a s a runner too.

****, but wait it's only aluminum deposits mso it can be removed Yhea! So far just using steel wool and scotch brite.

Lee

Chainsaw Repair

News:

Author Topic: picked two more CS-440 (Read 1115 times)

Giles

Re: picked two more CS-440

Giles

Re: picked two more CS-440

mountainlake

Re: picked two more CS-440

leec

Re: picked two more CS-440

leec

Re: picked two more CS-440

Related Topics