Author Topic: Avatar Settings  (Read 1259 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Avatar Settings
« on: February 07, 2012, 01:54:09 pm »
I doubled the size of the   avatar from 65x65 to 120x120 to allow bigger avatars. This uses the attachment space for posting pics embedded here so let me know if you have troubles or we run out of space and I will purchase some more attachment space.

You will need to upload new avatars to get the bigger pic of your avatars to take effect.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Avatar Settings
« Reply #1 on: February 07, 2012, 06:48:27 pm »
cool 8)
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Avatar Settings
« Reply #2 on: February 07, 2012, 08:02:00 pm »
If anyone needs help uploading a new bigger avatar just let me know and I can hook you up too. 

I have it set on to automatically resize any to big  avatars to size to fit.
REDNECK Saw Repair

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Avatar Settings
« Reply #3 on: December 09, 2012, 02:34:20 pm »
I can't get my PB sourced avatar pic to work.  I was able to get one of my PB sourced pics to show (out of the many that I tried), but it wasn't the one I wanted to use and is a crappy pic.  The avatar pics that I've use (and am using) on the 'other' really popular board don't work here............despite their meeting the size requirements here.  The 'other' site has stricter/smaller requirements than here.........and the pics work there but not here.  Strange.....  ???
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Avatar Settings
« Reply #4 on: December 09, 2012, 02:54:12 pm »
Post you pic right here. I can fix that for you.

 My avatars are from PB. So something isnt right on your end I would say.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Avatar Settings
« Reply #5 on: December 09, 2012, 03:05:01 pm »

Here it as as an avatar pic that works 'elsewhere'.



Here it is before I cropped and resized it for avatar use.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Avatar Settings
« Reply #6 on: December 09, 2012, 03:32:30 pm »
I just selected a photo from the pictures in my computer and it made it into a Avatar.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Avatar Settings
« Reply #7 on: December 09, 2012, 03:33:47 pm »
I just selected a photo from the pictures in my computer and it made it into a Avatar.

I took care of him already.

Quote works now too and also added quick reply woooohooooo.
REDNECK Saw Repair

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Avatar Settings
« Reply #8 on: December 09, 2012, 05:41:26 pm »
Thanks buddy!
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Chris J.

  • 4 cube
  • **
  • Posts: 45
  • Karma: 3
  • Chainsaw Hoarder & Tinkerer
  • Location: Inescapeable abyss, Texas
Re: Avatar Settings
« Reply #9 on: December 10, 2012, 09:27:01 am »
I was able to upload two different avatars from my computer with no problems.   I didn't even have to resize them,  I'm guessing that they didn't exceed the size limit,  or the software here automatically took care of it.

I pulled my first choice because it got me in trouble at AS,  not enough cloth in the "right" places :o.
I'm a chainsaw hoarder & tinkerer.  The brand isn't usually important,  if the price is right I'll probably buy it.

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
493 Views
Last post February 27, 2011, 12:24:14 am
by Cut4fun .
5 Replies
788 Views
Last post October 01, 2012, 06:29:08 pm
by Cut4fun .
2 Replies
382 Views
Last post July 17, 2014, 02:55:38 pm
by circe
3 Replies
363 Views
Last post July 31, 2014, 01:06:25 am
by 3000 FPS
2 Replies
478 Views
Last post October 15, 2014, 05:49:59 am
by Little Al
3 Replies
154 Views
Last post December 19, 2015, 06:28:52 pm
by farmboy
5 Replies
1192 Views
Last post February 23, 2016, 11:10:39 am
by countryhog
4 Replies
367 Views
Last post June 28, 2017, 04:42:13 pm
by flyingdg
5 Replies
211 Views
Last post April 05, 2018, 09:26:50 am
by Cut4fun .
4 Replies
76 Views
Last post May 15, 2020, 07:11:28 am
by Cut4fun .