Author Topic: Homelite 150 Automatic  (Read 3167 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Homelite 150 Automatic
« Reply #10 on: June 30, 2014, 10:02:14 pm »
I had one of these for 25 years. They are around 45cc and pull a 16" 3/8 chain just fine.

I have one now down in the barn that someone gave me. I stole the chain from it and use on my Dolmar 115i. I gave the bar to cut4fun I think? I don't want to run it. The vibration is so bad, my hands would ache for a week.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Homelite 150 Automatic
« Reply #11 on: July 01, 2014, 07:33:47 pm »
Like Jim said V i B r A t I o N. 

Sorry was trying to type right after running it.  Not a saw for me but seems to going to be traded in.   

Noticed while pulling it over the chain wants to turn too. So must be something stuck.  I can stop the chain and idle with chain on the wood though.  If I idle it down passed where I feel idle rpm should be it shuts off.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Homelite 150 Automatic
« Reply #12 on: July 01, 2014, 08:46:55 pm »
150's are evil.  Homelite's answer to the mini-mac.  Only good thing about them is that they share clutch pars and bars/chains with Super E-Z's.8)

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Homelite 150 Automatic
« Reply #13 on: July 01, 2014, 10:15:54 pm »
150's are evil.  Homelite's answer to the mini-mac.  Only good thing about them is that they share clutch pars and bars/chains with Super E-Z's.8)
The only thing good about a 150 is K095 mt bar.  Anybody want one pay ship to you LOL.
Shep

Offline pete

  • Piped Saw
  • *****
  • Posts: 499
  • Karma: 37
Re: Homelite 150 Automatic
« Reply #14 on: July 02, 2014, 03:47:45 am »
150's are evil.  Homelite's answer to the mini-mac.  Only good thing about them is that they share clutch pars and bars/chains with Super E-Z's.8)
The only thing good about a 150 is K095 mt bar.  Anybody want one pay ship to you LOL.
Shep

They are great for keeping the mozzies away, I have 1 that runs fine smokes like hell but wont cut as soon as you hit the wood she bogs the chain but motor wants to keep revving so I gather clutch is stuffed. Put a pic up of it once and a comment was it was an east coaster with rubber grip not real common????

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Homelite 150 Automatic
« Reply #15 on: July 02, 2014, 09:54:50 am »
pete there's another 150 with rubber handle that started the thread I posted the one I was looking over.



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Homelite 150 Automatic
« Reply #16 on: July 02, 2014, 02:07:18 pm »
Well that was easy as to why the clutch was acting weird and I couldnt adjust to get chain to stop.

REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Homelite 150 Automatic
« Reply #17 on: July 02, 2014, 03:59:53 pm »
150's are evil.  Homelite's answer to the mini-mac.  Only good thing about them is that they share clutch pars and bars/chains with Super E-Z's.8)
The only thing good about a 150 is K095 mt bar.  Anybody want one pay ship to you LOL.
Shep

They are great for keeping the mozzies away, I have 1 that runs fine smokes like hell but wont cut as soon as you hit the wood she bogs the chain but motor wants to keep revving so I gather clutch is stuffed. Put a pic up of it once and a comment was it was an east coaster with rubber grip not real common????

Your auto oiler diaphragm is shot.  It's sucking bar oil into the engine.  Great for mozzie fogging..............but not for cutting.:D

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Homelite 150 Automatic
« Reply #18 on: July 02, 2014, 06:48:57 pm »
I can bring mine over and you can have it as a parts saw?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dynodave

  • 4 cube
  • **
  • Posts: 35
  • Karma: 3
  • Location: Hamilton MASS USA
    • AGTS
Re: Homelite 150 Automatic
« Reply #19 on: July 02, 2014, 08:59:48 pm »
Well that was easy as to why the clutch was acting weird and I couldnt adjust to get chain to stop.


That is what I call the AH HA moment when all becomes clear....
press on....
32 saws
ECHO-HOMELITE-HUSQVARNA-McCulloch-PIONEER-POULAN-STHIL

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
1940 Views
Last post August 24, 2011, 11:22:23 pm
by Roanoker494
12 Replies
749 Views
Last post November 25, 2012, 09:54:08 pm
by Al Smith
3 Replies
338 Views
Last post October 10, 2012, 08:39:11 pm
by Al Smith
13 Replies
301 Views
Last post December 15, 2013, 09:46:37 pm
by johnhenryrolf
2 Replies
1111 Views
Last post December 16, 2013, 02:04:46 pm
by Gregsl
1 Replies
25 Views
Last post October 17, 2014, 09:47:19 pm
by chainsawlady
4 Replies
219 Views
Last post March 14, 2015, 08:38:33 pm
by man of stihl
28 Replies
1809 Views
Last post March 31, 2019, 09:07:00 am
by super44
9 Replies
397 Views
Last post November 25, 2019, 04:33:03 pm
by Philbert
3 Replies
117 Views
Last post November 22, 2019, 09:49:18 am
by Cut4fun .