Author Topic: homelite 240 gas leaking (Read 1090 times)

jrdplowing · « **on:** February 03, 2015, 11:58:26 am »

i have a 240 and it is now going thru gas like it is leaking somewhere,i have never been able to use above head because of gas coming out from somewhere,but now iam investigating and going to try and repair fuel line or check for cracks and have taken the pull start cover off and see there is 2 holes into the tank 1 into gas side and 1 into oil side,is there supposed to be some kind of a check valve or how do these work to stop fluids from coming out,also do i need to pull flywheel to get tank out to get to the fuel line side,thanks for any help

660magnum · « **Reply #1 on:** February 03, 2015, 12:03:40 pm »

The fuel and oil lines are supposed to fit tight through the holes. Maybe it is the wrong size line?

jrdplowing · « **Reply #2 on:** February 03, 2015, 12:21:21 pm »

i havent even got the tank out to see the fuel line side,but when i got the side cover off i noticed 2 holes 1 to the fuel side and 1 to the oil side,reference # 22 looks like on your diagram and they are not there on my tank,what is part # 22, and do i have to remove the flywheel to get the tank out.thanks,

660magnum · « **Reply #3 on:** February 03, 2015, 02:53:17 pm »

They are duckbill check valve tank vents - they may have different flanges from these?

http://www.partsimple.com/07-004-ore-n-36.html?gclid=CNPS68DGxsMCFQ6AaQodfn0AwQ

Cut4fun . · « **Reply #4 on:** February 03, 2015, 03:04:36 pm »

I had a homelite super 240 way back. I stole the coil out of it one day for my poulan 2000. Coil still in there today.

jrdplowing · « **Reply #5 on:** February 03, 2015, 06:14:46 pm »

thanks for the help i had to order 2 check valves and hope they fix the problem,still would like to know if the engine has to come out to get the tank out,thanks

660magnum · « **Reply #6 on:** February 03, 2015, 06:44:32 pm »

I have no clue as I have never owned a 240. Maybe someone will chime in here with the knowledge?

jrdplowing · « **Reply #7 on:** February 13, 2015, 10:03:59 am »

installed 2- new check valves 1 for fuel side and 1 for oil side of tank,fixed leak at end of fuel line by snipping off and reinstall,started and runs great with no leaks, but would still like to know how to remove tank to upgrade all lines, thanks for any help

Cut4fun . · « **Reply #8 on:** February 13, 2015, 11:16:49 am »

Looks built like the other little homies. Remove flywheel and then tanks come out. That is my WAG

Homelite 240 IPL http://www.barrettsmallengine.com/partslist/homelite240ut10621.pdf

jrdplowing · « **Reply #9 on:** February 13, 2015, 11:36:19 am »

thanks, thats what i thought, do i need any special tool or just standard pullers,thanks again

Chainsaw Repair

News:

Author Topic: homelite 240 gas leaking (Read 1090 times)

jrdplowing

homelite 240 gas leaking

660magnum

Re: homelite 240 gas leaking

jrdplowing

Re: homelite 240 gas leaking

660magnum

Re: homelite 240 gas leaking

Cut4fun .

Re: homelite 240 gas leaking

jrdplowing

Re: homelite 240 gas leaking

660magnum

Re: homelite 240 gas leaking

jrdplowing

Re: homelite 240 gas leaking

Cut4fun .

Re: homelite 240 gas leaking

jrdplowing

Re: homelite 240 gas leaking

Related Topics