Author Topic: XL 12 questions  (Read 978 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Coil Spring Stud Spacer Pics...
« Reply #20 on: January 03, 2014, 09:04:21 pm »
Here ya go Jerry.  You can see the remainder of the 3/8" coil extension spring (originally was longer, with hooks/eyes on each end) and the two spacers I've made from it so far.  4 coils is about the right width, at least with this spring.  You may have to adjust that coil count depending on the wire thickness of the spring you get, as well as your bar thickness.  Obviously you want the spacers to be just narrower than your bar.  The second pic is of the spacers on the studs of my Poulan Pro 375.


-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Buddy

  • 3 cube
  • *
  • Posts: 16
  • Karma: 1
  • Location: Virginia
Re: XL 12 questions
« Reply #21 on: January 04, 2014, 08:35:52 am »
I have used a heli-core for the spacer if needed.
You can buy a pack of (6) in most auto part stores.
They come in most any size you need even metric.
Most of the time their is no cutting , just slide it on the stud.
Buddy

Online countryhog

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 15
  • Location: NW arkansas
Re: XL 12 questions
« Reply #22 on: January 04, 2014, 09:14:14 am »
thanks aaron,
now i get it. a picture, a thousand words, etc.
jerry
now is never here but the past is always present.
semper fi ya'll

 

Related Topics

  Subject / Started by Replies Last post
177 Replies
15761 Views
Last post February 15, 2018, 11:27:01 am
by Cut4fun .
38 Replies
3429 Views
Last post August 11, 2012, 01:32:55 pm
by SawTroll
1 Replies
293 Views
Last post December 22, 2011, 04:27:24 pm
by Cut4fun
9 Replies
1244 Views
Last post August 22, 2012, 10:37:55 am
by Vance in AK
4 Replies
1018 Views
Last post August 19, 2012, 11:48:10 am
by man of stihl
6 Replies
449 Views
Last post December 06, 2012, 07:49:40 pm
by DickT
12 Replies
502 Views
Last post November 16, 2013, 06:47:39 am
by NHRA1877
26 Replies
326 Views
Last post December 27, 2013, 10:04:20 am
by KilliansRedLeo
14 Replies
380 Views
Last post November 24, 2016, 03:59:02 pm
by Eccentric
3 Replies
57 Views
Last post May 07, 2020, 10:00:44 pm
by Super360