« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Bar Length  (Read 1798 times)

0 Members and 0 Guests are viewing this topic.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway
Re: Bar Length
« Reply #20 on: February 08, 2014, 08:25:04 pm »
15-16" is ideal for balance and perfornance on a 346xp or similar - longer or shorter comes with a tradeoff "bill".

Each to his (or her) own, nothing is carved in stone!  ;D
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Bar Length
« Reply #21 on: February 11, 2014, 09:59:26 am »
I run a 14 on my OE 346 and a 16 on the NE.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Gregg MacPherson

  • 4 cube
  • **
  • Posts: 47
  • Karma: 3
Re: Bar Length
« Reply #22 on: February 13, 2014, 03:58:10 pm »
I've been cutting my firewood for nearly 20 years with an old Husky 154 with a 14" bar, 0.325, 0.058".  Just recently upgrading my understanding a little and thinking of getting a longer bar.  The manuals give 18" as the max length.  That might be OK for me,  but I'm just wondering what sets that limit.  Is it the oil pump?

Cheers,
Gregg
Logged

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 369
  • Karma: 129
  • Location: Ulster County, NY
Re: Bar Length
« Reply #23 on: February 13, 2014, 04:17:11 pm »
No right or wrong here. Everyone just picks what feels best to them.

My preference for 50cc class saws is 16" .325. Gives me the best balance/handling.

I know there is the never ending debate about whether to convert these saws to 3/8 or not, with various reasons for or against. But for me, the ticket is to keep the .325 and switch to an 8 pin rim. About the same extra diameter as a 7 pin 3/8 to provide more chain speed, but without the additional drag of the wider kerf chain.
Logged
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395

Offline Gregg MacPherson

  • 4 cube
  • **
  • Posts: 47
  • Karma: 3
Re: Bar Length
« Reply #24 on: February 13, 2014, 04:53:07 pm »
Interesting thoughts.  I remember working with the portable mill guy when we milled the macrocarpa (cyprus) to build my house.  He had a 154 I think with a shortish bar that he called his limbing saw.  A few years later I bought one from a friend.  Heavily used and beat up looking,  but the engine pulling really well.  I'm wondering if the oil pump capacity sets a limit on bar length?  Perhaps the limit set by horse power or ergonomics/balance comes up before that?
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bar Length
« Reply #25 on: February 13, 2014, 06:02:06 pm »
Could be either way. Like a Dolmar 7900 has power for a 32" bar but for good oiling you best stay with 28" or less.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway
Re: Bar Length
« Reply #26 on: February 14, 2014, 09:16:26 am »
Quote from: Spike60 on February 13, 2014, 04:17:11 pm
No right or wrong here. Everyone just picks what feels best to them.

My preference for 50cc class saws is 16" .325. Gives me the best balance/handling.

I know there is the never ending debate about whether to convert these saws to 3/8 or not, with various reasons for or against. But for me, the ticket is to keep the .325 and switch to an 8 pin rim. About the same extra diameter as a 7 pin 3/8 to provide more chain speed, but without the additional drag of the wider kerf chain.

I totally agree!  ;D
Logged

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway
Re: Bar Length
« Reply #27 on: February 14, 2014, 09:29:02 am »
Quote from: Gregg MacPherson on February 13, 2014, 03:58:10 pm
I've been cutting my firewood for nearly 20 years with an old Husky 154 with a 14" bar, 0.325, 0.058".  Just recently upgrading my understanding a little and thinking of getting a longer bar.  The manuals give 18" as the max length.  That might be OK for me,  but I'm just wondering what sets that limit.  Is it the oil pump?

Cheers,
Gregg
I would put a 16" on that one, but I am sure you can stretch it to 20" if you really need it. Balance and handling will of course suffer with a 20".
Logged

Offline Gregg MacPherson

  • 4 cube
  • **
  • Posts: 47
  • Karma: 3
Re: Bar Length
« Reply #28 on: February 14, 2014, 03:47:04 pm »
Thanks Sawtroll,
But I have to put ideas about the bar on hold.  Other things to fix.  I replaced the oil pump (with a used one) and fixed an oil leak a few days ago,  but sudenly it's passing a lot of oil from under the chain brake.
Logged

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
Re: Bar Length
« Reply #29 on: February 22, 2014, 07:50:14 pm »
 

Quote from: gunrac on February 08, 2014, 06:42:13 pm
Quote from: Cut4fun on February 08, 2014, 02:27:22 pm
I liked 12" on the 338. 14" was longest I had for them.

I will end up w/a 12" if this other saw proves to be worthy.

Got one,  new/old stock on on ebay. This one doesn't have the tapered nose. 18 buck's to my front door....


Logged
Pages: 1 2 [3]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
3 Replies
748 Views 		Last post April 07, 2011, 08:43:57 pm
by Old Iron Logging
3 Replies
1109 Views 		Last post December 11, 2012, 08:28:41 am
by davbell22602
2 Replies
497 Views 		Last post March 19, 2013, 04:14:39 am
by Al Smith
7 Replies
609 Views 		Last post April 19, 2015, 10:07:34 am
by 1manband
5 Replies
544 Views 		Last post September 17, 2015, 06:46:44 pm
by Cut4fun .
0 Replies
298 Views 		Last post November 29, 2015, 11:01:10 am
by DaveJ
0 Replies
322 Views 		Last post November 29, 2015, 11:55:23 am
by Cut4fun .
25 Replies
2978 Views 		Last post March 09, 2021, 02:27:07 pm
by Cut4fun .
1 Replies
685 Views 		Last post November 10, 2022, 07:11:57 pm
by Elden