Author Topic: 1100CD  (Read 602 times)

0 Members and 0 Guests are viewing this topic.

Offline Randy Mac

  • 3 cube
  • *
  • Posts: 21
  • Karma: 5
  • Location: NW CA
1100CD
« on: June 14, 2011, 09:30:47 pm »
I just picked this one up at the PNW GTG. I'll add more pics later.
It was misidentified as a 380CD, but a quick measure of the bore says it is 99cc.




Share on Facebook Share on Twitter


Offline Randy Mac

  • 3 cube
  • *
  • Posts: 21
  • Karma: 5
  • Location: NW CA
Re: 1100CD
« Reply #1 on: June 15, 2011, 07:41:14 pm »




Offline 05_sprcrw

  • 4 cube
  • **
  • Posts: 65
  • Karma: 3
Re: 1100CD
« Reply #2 on: June 17, 2011, 01:59:13 pm »
good looking saw

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: 1100CD
« Reply #3 on: June 19, 2011, 12:24:24 pm »
Nice collectors item!   ;D

Offline Randy Mac

  • 3 cube
  • *
  • Posts: 21
  • Karma: 5
  • Location: NW CA
Re: 1100CD
« Reply #4 on: July 08, 2011, 07:24:26 pm »

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 1100CD
« Reply #5 on: July 09, 2011, 04:59:43 pm »
randy mac I think you know why I am laughing. I see the T handle is gone and the D ring is in place.  I take it it numbed the fingers a time or 2.

Worst one I ever had was in dead of winter and a dolmar 166 with hard plastic T handle broke in to pieces in my hands during a kick back. Hands were already cold as %$&*. ms460 rescue handle went back in it's place.
REDNECK Saw Repair Getter Done

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: 1100CD
« Reply #6 on: July 09, 2011, 06:22:31 pm »
If it helps any this is what I did .The 038 Mag and the 2100 both have Stihl 460 D-handles .I ran a few wraps of rubber tape around them then a couple wraps of plastic . The 084 has a handle with molded things in it for your fingers ,it's not too bad .

I too had one break about like the one you have .Typical ,colder than the dickens ,ouch .

Now I suppose most folks might think it odd to have a d-handle on a 72 cc 038 mag,trust me that thing can hurt you with just a standard handle .I kinda got the comp jacked a tad . ;)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 1100CD
« Reply #7 on: July 09, 2011, 07:50:45 pm »
I got another one for you Al like the 3rd one in your pic when the 63ps3 get here.
REDNECK Saw Repair Getter Done

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: 1100CD
« Reply #8 on: July 09, 2011, 09:14:31 pm »
What is that handle off of on the 084?


Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 1100CD
« Reply #9 on: July 09, 2011, 09:21:59 pm »
What is that handle off of on the 084?

It was one Marcel Vincent MVP liked to use and came on my 166 hotsaw,   I just liked the 460 rescue better on my hands.


REDNECK Saw Repair Getter Done